 |
Parts Wanted Ads |
|
| Advertisers health warning:- Please be wary of any purchasers whose offers seem too good to be true or strange, they are probably fraudulent, money laundering, or similar! So far they seem to have originated from overeas. Speak to Mel if in doubt. You have been warned! |
|
| Wanted |
A good set of used valves please. |
Email: Ade Simpson on this link |
Posted
2 February 2012 |
|
| Wanted |
I'm looking for a MOTO MARTIN frame only, any condition considered, I am willing to pay cash,
or:
I also have a modified prolink taxed and tested which I will swap with cash either way. |
Tel: James on 07794 333976 or email: James Fisher on this link |
Posted
10 January 2012 |
|
| Wanted |
I have a perfect right hand switch gear for a prolink but
I need a perfect right hand switch gear for 1000 Z,
Can anyone help? |
Email: Steve Golding on this link |
Posted
13 November 2011 |
|
| Wanted |
I’m looking for an engine, Z or Prolink, with Carbs for a project. Condition not important. |
Email: Peter Galia on this link |
Posted
23 October 2011 |
|
| Wanted |
Standard rear mudguard for a Z, UK or USA dont really mind, plus a standard Headlight Bowl. Used is fine but I do not want a damaged one as I already have one of those! |
Tel: Vin on 07796 268345 or email: Vin Egan on this link |
Posted
2 September 2011 |
|
| Wanted |
I am looking for the following NEW parts for a CBX1000z 1979.
As stated the parts must be new and I fully realise how rare they are in new condition but I am prepared to pay a high price for the correct items.
If it helps I have many new spares in my private stock so if you wish I am happy to exchange for something you may require with cash adjustment either way.
PLEASE DO NOT ASK IF I AM PREPARED TO SELL THESE SPARE PARTS SEPARATELY AS I WISH TO KEEP THEM FOR A FUTURE PROJECT.
• 35200 422 611 (Superseded by 35200 422 612 Left Hand Switch Assembly - Winker)
• 37200 422 671 Speedo Assembly - (MPH)
I will travel anywhere in the UK to collect and will pay your price and not haggle.
|
Email: Doug Harding on this link |
Posted
7 August 2011 |
|
| Wanted |
My USA ‘Z’ head is off being rebuilt at the moment, and it appears someone has had it down before. They very kindly didn’t put the valve seats back in when they put it back together, so the valve springs are trying to munch their way through the head! Can anyone help to supply:
14775-422-000, Valve Spring Outer Seat – All missing
14776-422-000, Valve Spring Inner Seat – 4 missing
|
Email: Alan Jackson on this link |
Posted
12 June 2011 |
|
| Wanted |
Required: parts for a CBX 1000Z:
1. A center stand.
2. A cover for the air filter box, located under the seat.
3. An original horn.
|
Tel: Mark on 01224 637566 or email: Mark Smith on this link |
Posted
23 March 2011 |
|
| Wanted |
CBX1000B cover for nearside fairing pocket, non locking one!
Consider a whole upper fairing if in good condition for the CBX1000B as mine is scratched and gouged. |
Tel: Nigel on 01245 475059 or email: Nigel Peckham on this link |
Posted
8 February 2011 |
|
| Wanted |
Looking for following items in very good / A1 condition for CBX 1000Z
1 Spark Unit - mine is working but in a bit of a state, the bitumen insulator has melted...
(Part Number 30400-422-000)
Front Wheel - just trying to get a really nice one, unmarked
(Part Number 44650-422-305)
Rear Wheel - just trying to get a really nice one, unmarked
(Part Number 42650-422-305)
Fuel Tank (Silver) - mine has a dent and not sure if it can be repaired easily, paintwork doesn't have to be perfect
Part Number 17520-422-000ZA)
Set of exhausts, have to be A1
|
Tel: Andy on 01925 657247 - 07934 443492 or email: Andy Cliff on this link |
Posted
15 Jan 2011 |
|
| Wanted |
Right hand switch gear (uk spec) with light switch for 79 Z |
Email: Steve Golding on this link |
Posted
2 Jan 2011 |
|
| Wanted |
Seat tailpeice to fit a CBX 1000Z. |
Tel: Neil on 07507 042695 or email: Neil Salter on this link |
Posted
31 Oct 2010 |
|
| Wanted |
US Spec Alternator Cover.
Headlamp Shell for Z Model.
|
Tel: Phil on 07770 647686 or email: Phil Millard on this link [Hampshire] |
Posted
17 Sept 2010 |
|
| Wanted |
Restoration of my 1979 USA ‘Z’ model; need a headlamp shell as the current one has a chunk missing from the top. |
Tel: Alan on 01376 329749 or email: Alan Jackson on this link |
Reposted
18 June 2010 |
|
| Wanted |
WANTED URGENTLY BY CLUB MEMBER: Any make of six into one exhaust. Cash waiting W.H.Y? Also interested in other cbx parts.
No scammers please the club will check you out. |
Tel: Mike on 07716 532931 between 9 am & 13:00 hrs (1 pm) Monday to Friday or email: Mike on this link [Bristol Area] |
Posted
11 June 2010 |
|
Please note that ads older than 4 months will be removed, if you need anything reinstated please let me know along with any required updates
on this link - Barry |
|
If you would like to advertise here please send details to Barry Brissenden.
This is a members only facility to advertise! |
|
| |
|
|
|
|
|
|
|
|
|