Old Ads
                   

Wanted An exhaust collar for a Z. Email Thomas Potter on this link
Posted
30 August 2006

For Sale Click to see larger viewBlack V reg CBX1000A model. Long MOT and in excellent condition and running order. 22000 miles. Crashbars and plenty of paperwork. Chrome Marving 6 into 2 fitted. Genuine reason for sale. £2650 ovno. Tel: Brian Gray on 01 367 252820 [Gloucs]
Reposted
8 Aug 2006

For Sale 1000Z spares unless marked otherwise. Members only and plus p&p. No scammers please.
1) Set of 1000Z carbs. Not mint but complete and with vac tap. £125.00
2) Pair of complete fork legs with air caps. Believed off an A model. £40.00
3) Twin piston p/link rear caliper with spray shield. £30.00
4) 1000Z oil cooler £20.00
5) 1000Z silver tank (no badges) one small ding smaller than 5p and not deep. £50.00
6) Pair of chrome exhaust heat shields which fit all models of cbx1000. Good condition.£40.00.
7) Brand new NOS 1000Z front mudguard in glorious candy apple red. £150.00
Tel Mick on 01 628 621506 [Maidenhead] or email Mick Hill on this link
Posted
15 Sept 2006

Wanted Seat for my CBX Z. Seat needs to be original and in good condition with strap and trims. Email Petri Koivisto on this link [Finland]
Posted
14 Sept 2006

For Sale Click to see larger viewCBX Pro-Link special
1981, updated in 2000 to current specification, awards at UK and Euro rallies. 46K miles, always serviced by owner. New cam chains fitted on 2003. Just completed full service and tune, new rear wheel bearings, fresh paint on seat unit & fork seals. £4500
Tel: Steve on 01 206 523442 or email Steve Page on this link
Posted
17 May 2006

Wanted Just started restoring a '79 Z model. Looking for front mudguard (paint condition not important), centre stand, pivot bar and spring, rear axle and spacers, and tail piece. Tel: Lawrence on 07713 502566 [Southport, Merseyside]or email Lawrence Aughtonon on this link
Posted
10 Sept 2006

For Sale Click to see larger viewHONDA GL1100 Goldwing Plain Jane. 1980 V reg, Metallic Burgandy, genuine 16190 miles and only three owners from new. Excellent condition, new Motad exhaust and disc pads all round. Fully serviced including new cam belts. Original toolkit including Honda tyre pressure gauge. MOT to April 2007. Taxed Oct 2006. £1500. Tel: Hubert on 01 631 760253 [Scotland]
Posted
30 August 2006

Wanted Front right side caliper for CBX1000Z - preferably in good condition. Tel: Dennis Lodge on 01928 717624 or email Dennis on this link
Posted
26 August 2006

Wanted Front and rear 1000z wheels which must be in pristine condition. Tel: Kenny on 07740 725361 or email Kenny Allan on this link
Reposted
4 June 2006

Wanted Moto-Martin for non member. If you are interested in selling then contact me and I will make the details available. Email Barry Brissenden on this link
Posted
27 December 2005

Wanted Wanted by club member. CBX1000A model, in black or red in good condition with SCO frame & engine No's. Cash waiting. Tel: John evenings and weekends on 01 977 645512 or 07977 419199 anytime [Pontefract]
Posted
3 February 2006

For Sale Click to see larger viewClick to see larger view CBX1000Z Silvery, only 3000 miles. Must be one of the best available. £5,500 ono.
Also complete brand new red bodywork available still in boxes £1500 the set.
Tel: James on 01380 831152 or 07973 409883 or email James Brewster on this link
Posted
26 June 2006

For Sale Click to see larger viewClick to see larger view Honda CBX1000Z. 1st reg 8-2-79. 17500 genuine miles. One mature owner from new. Fully documented history and mileage. All MOT's kept. Genuine Honda / Rickman crashbars, owners handbook and toolkit. Originally red but changed to silver about ten years ago. Reluctant sale to a good home. £3950. Tel: Colin on 020 8398 4629 or 07860 756708 for full details. [Surrey]
Posted
10 July 2006

Wanted Main stand wanted for CBX 1000Z '79! Pipe, spring and half moon plate needed as well! Email Petri Koivisto on this link [Finland]
Reposted
17 May 2006

For Sale New Kerker 6:1 exhaust system 50 miles only, £325. Tel: Ian Button on 01242 221458 / 01242 862657 [Cheltenham] or email Ian on this link
Posted
10 July 2006

For Sale UNIQUE BIT OF CBX HISTORY. John Froude's 1998 Early Stocks Championship winning black 1000Z.T reg, fitted with 6 into 2 RC exhaust, Koni's, crash bars and steering damper. Only 47 miles since full engine rebuild by present owner. £3,750 ovno. Please, no time wasters or scammers. Tel: Roy on 07961 873467 anytime [Surrey] or email Roy on this link
Posted
28 January 2006

For Sale 1981 X reg grey Pro-Link with genuine 26,000 miles on the clock. VGC. MOT. Being sold on behalf of the estate of late member John Roberts. Please contact Bill Underwood of Kenilworth Motorcycles if you wish to view the machine. £2500 o.n.o. Tel: Bill Underwood of Kenilworth Motorcycles on 01926 857315 [Kenilworth]
Posted
26 January 2006

For Sale Click to see larger viewCBX 1000z look a like
1983 pro-link, immaculate condition, standard exhaust, corbin seat, dyna coils and ignition, honda panniers, paintwork star silver, 17,700 miles from new, 2 owners, taxed and tested, a few tasteful extras and quite a lot of spares, £3,750 ono.
Tel: Peter 01889 567992 / 07743 753928 or email Peter Clift on this link
Posted
24 June 2006

Wanted Speedometer for a CBX '79 model. Kilometer version (not miles) for overseas colleague. Email Erlend Jensen (jobb) on this link [Norway]
Posted
9 January 2006

Wanted Wanted Urgently: 150mph Speedo from any model of CBX1000 to fit my US spec Pro-Link. Please help. Tel: Jim Innocent on 01 642 888305 [Cleveland] or email Jim on this link
Reposted
7 January 2006

Wanted Top banjo bolt to fit the oil pipe from the crankcase to the head between the carbs part # 90025422000 Tel: Dave on 02392 529951 or email Dave Snell on this link
Posted
12 June 2006

For Sale Click to see larger viewClick to see larger view
W reg Red 1000Z. Original Honda exhaust, toolkit and workshop manual. 27000 miles. Very nice condition. £3,950. No scammers please or time wasters.
Tel: Jim on 07811 270108 anytime [Clacks, Scotland] or email Jim Mitchell on this link
Posted
8 March 2006

For Sale 2) Rickman Hondastyle rack £100.00.
For sale members only +p&p
Tel Richard Ebejer on 01 489 795013 or 07967 024311 [Southampton]
Posted
19 Apr 2006

For Sale Click to see larger viewClick to see larger view
W reg red 1000Z UK model with short bars in good condition. 40K, MOT, Tax, oil & filter change. Jama 6 into 2. New battery, owners handbook, workshop manual & parts catalogue. £3,750 ono
Tel: Graham on 01 438 816844 (Home) evenings & weekends or daytime 01 438 813307, mobile 07767 478379 or email Graham Pope on this link
Posted
16 February 2006

Wanted Outer half of generator or generator complete for a 1000Z. Non-working / faulty OK as dont need internals. Tel: Chris Davidson on 01889 881058 or email Chris on this link
Reposted
31 December 2005

Wanted Centre stand spring for a CBX 1000Z Tel: David O'Hara on 01501 730540 or email Davie on this link
Reposted
3 May 2006

Wanted Horn for CBX Z model. Tel: David on 07817 453193 [Birmingham] or email David Whelan on this link
Posted
2 May 2006

Wanted Inlet and exhaust valves. Tel: Dave Snell on 023 925 29951 or email Dave on this link
Posted
12 April 2006

Wanted URGENTLY WANTED: Oil Pump for a 1978 CBX z. Of course it must be in very good condition. Email Tim on this link [France]
Reposted
28 April 2006

For Sale Honda CB 1300. 2003 53 reg. British bike. Red and white. 4500 miles. Full Akrapovic pipe plus original. New Bridgestones plus extra rear. T&T. Real nice bike. Phone me for a good reason why it's sooooo cheap. £3600 ........ be quick. Tel: Andy Daws on 07768 665174 or email Andy on this link
Posted
3 October 2005

For Sale 1000Z spares unless marked otherwise. Members only and plus p&p. No scammers please.
1) Pair of Tommaselli chrome clipons £20.00. Your chance to become a boy racer!
2) Pair front calipers with brake pipes. Need refurb,hence only £15.00.
4) L/hand Z tank badge. Small marks on black paint which easily touched in.Only £5.00 p/free.
7) Pair standard screw in fork tops vgc. £10.00.
10) Metal cover between oil filler and engine sprocket cover. Needs paint or chrome. £5.00.
11) One carb top, needs clean and polish. £5.00.
16) Two coils still on alloy housing plus another coil which slightly cracked £20.00 the lot.
19) Pair chrome hinged brackets for saddle. Needs powder coating or re chrome. Hence only £5.00.
20) Front master cylinder reservoir. No cracks £7.00.
21) Complete lower assembly for primary chain. vgc. £25.00.
22) Pair front forks legs complete with spare seals. £45.00.
23) Several handlebar clutch assemblies including the hard to find choke lever and bolt. £7.00 each.
24) Oil cooler with chrome brackets. Needs paint. £10.00 to clear.
26) Gear lever with spare linkeage. £15.00.
27) Headlight bracket with rubbers for that p/link Z conversion, needs a paint, hence £20.00.
28) Set four p/link type indicators. £20.00.
29) Pair chrome chain adjusters with adjusting screws. £15.00.
31) Pair rear footrests with slight wear on rubbers, hence only £20.00.
32) Alternator inner housing . Very hard to find £15.00.
33) Clutch cables £5.00 each.
34) Pair main oil pipes x two. £15.00 a pair.
36) Starter clutch to clear £5.00.
38) Fork lower £5.00.
40) Brand new rear brake m/cylinder lower linkeage, still in packet £5.00.
43) Same but mint, hardly any wear. £10.00.
44) Airbox overflow reservoir £3.00.
45) Star item! inner magnesium (black) spacer over engine drive sprocket. The one that gets broken. Mint £25.00 doubt you will find one anywhere else. Good investment.
47) Petrol filler cap. vgc £10.00.
48) Mint alloy strap over filler cap £15.00.
49) Rear brake master cylinder, unpainted bare alloy. Needs stripping down. £10.00.
50) New front brake lever £7.00.
51) New clutch lever £7.00.
52) set 12 exhaust colletts £10.00.
54) Original Z horn, getting hard to find now £30.00.
57) Brand new large 17mm oil filter fixing bolt. Standard item is only 12mm and rounds easily. £7 postfree.
58) Brand new straps for 1000Z/A saddle. No fittings just bare strap. £10.00 post free. Only a few in stock.
59) New tanktop black & gold 'Preserve Nature / Wear a helmet' stickers. £3.00 postfree.
60) Brand new pair of Z or A sidepanel stickers. £6.00 the pair postfree.
63) Pair chromed main front engine brackets. Will fit any model of CBX £25.00 + p&p
64) Brand New lower gasket for barrels. £5.00 postfree. Still in Honda packet.
66) Official Honda Model introduction booklet which was supplied to all Honda dealer mechanics to give them lowdown on 1000Z. 29 pages. Sort of mini workshop manual. Very hard to find in good condition. £15.00
68) 1978 Honda Uk range brochure which folds out into large post of silver 1000Z. Mint condition £10.00
All cheques payable to Mel Watkins / please quote number of item when ordering.
Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
16 Apr 2006

Wanted Red 1000Z. (might consider good silver one), cash waiting for the right bike. Willing to travel anywhere in UK. Tel: Barry on 01 892 724744 evenings and weekends or 07774 466298 anytime [Kent]
Posted
12 April 2006

For Sale 1000Z spares unless marked otherwise. Members only and plus p&p. No scammers please.
7) Rear stoplight switch complete with harness £5.00
10) Complete set of twelve exhaust colletts £10.00.
13) Mint rear brake master cylinder res £10.00
15) Original horn. Hard to find now. £35.00
21) Several standard 1000Z wheels in various condition. £10.00 each
22) Rear sprocket cush drive assembly for 1000Z £15.00
Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
6 Dec 2005

For Sale Pro-Link petrol tank which is like new apart from two very small dings.
Price reduced to £85 + p&p
Tel: Gareth after 4 pm on 01 554 753861 [South Wales]
Reposted 3 Nov 2005

For Sale Members only, all items plus p & p
1) Pro-Link fairing pocket with lid which is lockable £20.00.
2) Pair of Pearl White leg guards, one slightly damaged £25.00 the pair.
3) Pair of brand new Honda luggage locks with keys £50.00
4) Virtually unmarked low windsreen, small cracks at fitting holes. £20.00
5) Top half of pearl white fairing with mirrors but no headlight glass. £50.00
6) 0 - 86mph speedo. £20.00
Tel: Mike on 01 328 700341 [Norfolk] or email Mike Harrall on this link
Reposted
21 Oct 2005

For Sale All parts to fit uk CBX Z plus postage
1) Speedo drive unit - £10
2) Clock covers top & bottom - £10
3) Fuel tank rubbers set of 3 - £10
4) Fuel tank chrome flap - £20
5) Battery box - £10
6) R/h switch us type - £10
7) Toolkit holder box - £10
8) Helmet lock & key - £10
9) Helmet lock no key - £5
10 Front footrests pair - £20
11) Rear caliper peephole cover - £10
12) Centrestand spring new - £3
13) Sidestand spring new - £3
14) Rear indicator wiring protectors pair - £10
15) Chrome rail - £10
16) Ignition advance unit 422 type - £20
17) Sprocket protection cover - £20
18) Oil cooler - £20
19) Braided oil pipes pair - £30
20) New gaskets clutch cover and 5X c/case cover, sump pan and alt cover o rings all for - £10
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
11 Oct 2005

For Sale Following items now available for cbx from Driven Racing in USA:-
  • Front Sprockets 17&18 tooth
  • Rear Sprockets-Black Aluminum 42/43/44 tooth
  • Chain-530 in all colours in the following tensile strength
  • MVX-9300, ZVX-10560,ZZZ-1100
Contact Noam or Gary on www.drivenracing.com
Posted
13 September 2005

For Sale All items to Members only. Plus p&p: -
  • Pro-Link Alternator - £200.00
  • Pair Nissin front four pot calipers to fit CBX - £60.00
  • Pro-Link side reflectors - £10.00 pair.
  • Pro-link handlebars - £25.00 pair.
  • Pro-Link front and rear foot pegs (Will fit Z) rear mint, front some wear - £60 the lot.
  • Set GPZ 600R carbs ready to fit to CBX with stage 3 Dynojet kit and 6 brand new air filters - £300.00
  • Set of Pro-Link carbs, fully recon with new seals and fitted with stage 3 Dynojet kit. Original jets also available. - £250.00
Tel: David Carroll on mobile 07746 314771 or home 020 84604407 [Kent]
Posted
31 August 2005

Wanted Following items for 1000Z:
  • 1x outer alternator / generator cover,
  • 1x pair front brake callipers (don't have to be original),
  • 1x centre stand and spring,
  • left and right hand switch units must be good condition not faded.
Tel: David O'Hara on 01501 730540 or email Davie on this link
Reposted
13 March 2006

Wanted Following items for 1000Z:
  • 1978 Honda Uk cbx1000z brochure, the one with the engine across both outer covers. Have p/l brochure for p/ex,
  • 6 into 6 or 6 into 1 exhaust system.
Tel: Paul Huart on 0191 4561652 [North East]
Reposted
8 October 2005

Wanted Sprintex S82 supercharger. Tel: David Carroll on mobile 07746 314771 or home 0208 460 4407 [Kent]
Posted
30 August 2005

Wanted Starter motor for a Z (or prolink if they fit?). Email David Snell on this link
Posted
13 March 2006

Wanted Oil strainer, the one you see after removing sump cover. Tel: Colin Anthony on home - 01454 316972 or work - 0117 9364123 or Email Colin on this link
Posted
29 January 2006

For Sale Click to see larger viewHonda CBX 1000z 1978 / T UK bike strengthened frame, zzr1100 front and rear ends with monoshock and alloy swing arm powdercoated wheels with recent 120 and 180 pirelli dragons. Genuine new honda prolink engine and carbs only done 2000 miles bike just rebuilt with new dynojet kit and k&n's. Aeroquip hoses, all cables, plugs, oil, and all nuts & bolts replaced. D&D 6 into 1. Professional yellow paint job, comes with workshop manual and parts and workshop manual on CD ROM. Absolutely stunning and can e mail more pics and details.
Now reduced to £3,500
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
11 October 2005

Wanted Wiring loon for CBX - that’s the main loom only. I do have all the other bits. Email Lawrence on this link
Posted
31 January 2006

For Sale Finish your classic machine with the ultimate Private registration. Tel: Alan on 07747 118324 [Seaham Co Durham] or email Alan Stubbs on this link
     
CBX 100T
     
Reposted
19 November 2005
Currently held on retention - no additional fees to fit to your bike. Now reduced to £1,000

For Sale Click to see larger viewHonda CBX750 (RC17) Bol D'or, 1985, the best air cooled 4 cylinder package ever built. Mint condition, 7200 miles, private plate "A17 CBX", all original except for Corbin style seat & grab rail (original supplied). Complete with original toolkit & handbook, workshop manual, dyno chart for BHP & mixture, & some new spares. Just had oil change, filters & plugs. MOT & Tax to November '06. Ready to show or ride.
Now reduced to: £1,995
Tel Reg Woods on 07778 490981 [South Wales] or email Reg Woods on this link
Reposted
19 November 2005

Wanted CBX crankcases, preferably Z model but anything considered. Tel: Sam Broad on 0117 937 3097 or email Sam on this link
Posted
30 October 2005

Wanted Old Laser six into one. Email Dave on this link
Posted
17 October 2005

Wanted I have found a company who is willing to fabricate a set of engine bars for me locally in Co Antrim. They specialise in stainless steel work of a very high standard. I am looking for a loan of a set of Rickman bars as a pattern and for cost estimate. This may lead to further interest for other CBX riders.....
I would be more than willing to leave a deposit and of course pay for any carriage involved.
I will be at the classic show in Stafford 15th October and visit the CBX club stand.
Tel: Bill Regan on 028 93 362891 / 07803 129584 or email Bill on this link
Posted
5 October 2005

Wanted Rear luggage carrier to fit either 1000A or Z. Cash waiting. Tel: Roger on 07860 775273 [Notts] or email Roger on this link
Posted
13 September 2005

Wanted
  • Right Hand Indicator Dashboard Light cover for 1000Z or Complete Dashboard Plate,
  • Red Tail for 1000Z.
Tel: Mark on 01603 470729 or email Mark on this link
Posted
13 June 2005

Wanted 6 k&n filters for a cbx 1000 z. Tel: Davie 01501 730540 or email Davie O'Hara on this link
Posted
26 May 2005

Wanted Does anybody have a rear brake Disc for a Prolink for sale - must be in good condition - sensible price please. Tel: Tony Smith 07976 355740 or email Tony on this link
Posted
5 November 2005

Wanted Pro Link, preferably 'Z' ised. Must be in excellent order. Email Steve Hendrick on this link
Posted
14 July 2005

Wanted Member would like to buy CBX Moto-Martin with chrome moly frame. Also will consider nice CBX special or standard mint example. Tel: Keith Thomas on 01 9467 25152
Posted
11 March 2005

For Sale 1000Z spares unless marked otherwise. Members only and plus p&p. No scammers please.
1) Mint condition Laser 6 into 1 with super chrome. The one everybody wants with short stubby rear end. Fantastic sound! Same as one on Steve Loftus's bike inside cover Spring 2005 issue CBX Rider.£175.00
2) Laser 6 into 2 into 1 black pipe assembly no rear pipe so you need to find a can etc. Only £30.00 to clear.
3) Original Z rear sprocket little wear but needs a clean. Hard to find in original condition.£20.00
4) Starter solnoid fits all model of CBX £5.00
5) Lefthand clutch and choke assembly complete £10. Needs painting but has the unobtainable screw in choke lever.
6) Good Secondhand throttle cables + clutch cable £10.00
8) Set of 6 carb intake rubbers good secondhand. £12.00 to clear.
9) Complete set of twelve brand new split exhaust colletts £15.00
12) Full set of four indicators for 1000Z complete with all chrome stems. A little bit of rust on two stems hence £65.00
11) Set of six finned alloy exhaust clamps £25.00
14) Front headlight complete all plastic, chrome and glass with bulb. £35.00
16) Front headlight bracket £25.00 needs painting.
17) Toolbox with correct battery sticker and bracket with nut / bolt to fit. £10.00
18) Both front and rear airboxs £25.00
19) Airfilter metal housing. Just needs the sponge filter. £10.00
20) 1000Z standard swinging arm. Needs repainting and therefore only £25.00
Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
6 Dec 2005

For Sale Kawasaki Z650 C3, 20K standard except for 4 into 1 Harris exhaust + Koni shocks. Includes brand new spare tank (in box) new seat + two others, fork stantions, cables, Mudguard etc. Lovely condition. £1800 or p/ex CBX or Moto-Martin. Tel: Paul on 0191 4561652. [North East]
Posted
8 June 2005

For Sale Click to see larger viewV reg Red 1000Z fitted with Rickman Bars. Has had a fortune spent on engine which totally rebuilt by A&H. Full history with MOT's, service record & bills. Workshop manual & parts book. Only 900 miles since full rebuild. Laser 6 into 2 into 1 otherwise standard. Ill health forces sale. Must go to a good home. £4,250 ovno. Tel: Chris on 0208 404 9295 or 07956 532201 [Twickenham, Middx] or email Chris on this link
Posted
8 Jun 2005

For Sale Click to see larger viewKawasaki ZRX 400. Immaculate condition, 1996, P Reg. Only 17000 Mls. 2 new tyres, tax is £30 / year! 9 months tax left. Eddie Lawson styling.
Reduced to £1500 for quick sale.
Tel Rich Noke on 01275 880102 or 07963 533879 [Clevedon, Nr. Bristol] or email Richard on this link
Reposted
10 May 2005

For Sale Late model Moto Martin CBX project all parts there but been standing, has FZR1000 front end and original Motor Martin forks as spares. Has been resprayed, FZR wheels. Frame has had professional repair. Buyer collects. Offers around £2,500. Have dyno charts from previous owner but have not run myself. Also needs final assembly. Tel: Mike Jennings on 01371 872843.
Posted
8 May 2005

For Sale Click to see larger viewCBX1000Z 1979 U.S. Import. Nearly 55000 miles, Tidy bike. Owned 4 years, Engine bars, Kerker 6 into 1. Unfortunately seat tail damaged. Taxed Oct 05, MOT April 06. £2100 ono. Tel: Mark on 01603 470729 or email Mark Ollett on this link
Posted
20 August 2005

For Sale Click to see larger viewClick to see larger view
T reg 1979 red 1000Z. Includes Rickman bars, toolkit, copy w/man, new tyres & Battery. 19000 miles. £2995 ovno.
Tel: Andrew on 01 925 757027 [Cheshire]
Posted
26 September 2005

For Sale CBX 6 into 2, stainless steel exhaust system. Very good condition.
Reduced to £275 ovno
Tel: Andy Golds on 07961 882881 [Warwickshire]or email Andy on this link
Reposted
8 October 2005

For Sale 1982 UK spec Pro-Link, 26K miles. Dry use only, MOT JUL 06, Tax Sep 05, New tyres, Panniers. Fitted with mint original exhaust. Just had service. Bike is in mint condition. £3100 ovno.
Click here to see pictures
Tel: Gareth after 4 p.m. on 01 554 753861. [South Wales]
Posted
18 August 2005

For Sale (members only) 1981 Pro-Link engine with guaranteed 19K, comes with carbs, wiring, coils, switchgear etc. £1000 ovno. Tel: John (Non member) on 01 244 830418 [Chester]
Posted
2 September 2005

For Sale Click to see larger viewHonda CBX 1000 in Candy Red with a custom painted fuel tank, this bike is in very good condition and after owning it for 6 years I need to let it go as I need the space for a new toy.
I have spent a lot of time and money powder coating all removable parts on the bike, swing arm, brake calipers, fork legs, headlamp and tail lamp brkts and the list goes on, it has also has additional chroming, new shocks and more - it has recently been serviced and given a very good clean bill of health.
Viewing available on request - you will not be disappointed. £3,250,00 ono
Tel: Alan on 07747 118324 [Seaham Co Durham] or email Alan Stubbs on this link
Reposted
18 September 2005

For Sale Click to see larger viewCBX 1000Z 1979 model, Red (just been professionally re-sprayed). New starter motor, Alternator, Chain & sprockets plus a Corbin seat. Bike is in good condition.
Now reduced to £2000.
Tel: Doug Gray on 01844 212570 or 07840 093237 [Thame near Oxford] or email Doug on this link
Reposted
14 July 2005

For Sale Click to see larger viewHonda VFR800i vtec (Non ABS model) 2003, plus panniers, scotoiler, hugger and spare double bubble screen. Very clean. £5500. Tel Doug Gray on 01844 212570 or 07840 093237 [Thame near Oxford] or email Doug on this link
Reposted
14 July 2005

Wanted Pulse generator, part number 30300-422-004 for a Z. Tel: Dave Peters on 01793 873133 or email Dave on this link
Posted
23 September 2005

For Sale CBX Pro-Link (magnum grey) 1981 35,000 miles, exellent motor, T&T, Marving 6 into 2, Hagon shock, otherwise complete and original with Honda CBX panniers, new tyres, Honda serviced, spares and workshop manuals, this bike has only seen dry mileage in last three years pampered ownership and is in good condition all round. £2995 ono. Tel: Peter on 01454 411961 or 0870 785 5780 (days) [Bristol] for further details.
Posted
22 Apr 2005

For Sale Pro link, 1981 mot'd, low miles good condition, excellent motor, well balanced carbs. £2800 Tel James Kay on 01821 650459 anytime [Perth] or email James on this link
Posted
18 Apr 2005

For Sale Click to see larger viewCBX A in black totally original £3000. Tel Doug Gray on 01844 212570 or 07840 093237 [Thame near Oxford] or email Doug on this link
Reposted
12 Mar 2005

For Sale Immaculate W reg red 1000Z. Rickman bars & W/manual. Recent new primary chain so runs well. MOT. BSM 6 into 2 chrome exhaust. Genuine reason for sale. Can supply pictures. £3950 ovno. Tel: Paul on 01 904 764710 leave message if not in. [York area]
Posted
25 July 2005

For Sale All parts to fit uk CBX Z plus postage
1] Frame powdercoated black with v5 £300
2] Fusebox and cover £10
3] Starter solenoid £10
4] Rear indicator wiring protectors pair £15
5] Rear lense black £5
6] Ignition advance unit 422 type £20
7] Sprocket protection plate £20
8] Oil cooler £30
9] Braided oil lines £25
10] Standard type seat £40
11] Front footrests pair £10
12] Toolkit holder £10
13] Clock covers £10
14] Battery box £10
15] Helmet lock and key £10
16] Chrome fuel tank flap £10
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
4 Jun 2005

For Sale Full original exhaust system for 1000Z. r/h side is very good but left side has had small stainless repair and needs further work. Includes heat shields and middle pipes. £350 ovno + p&p. Members only. Tel: Martin on 01 843 296502 or 07779 906006 anytime. [Kent]
Posted
5 May 2005

For Sale Black chrome, Cowley 6 into 1 exhaust vgc. Will fit any model of cbx1000. £150.00 plus p&p Tel club member Kevin on 01 474 813767 (evenings) [Kent]
Posted
15 Apr 2005

For Sale Ignition box (spark unit) only works on two of three units. Easy repair. Only £30.00 plus p&p. Tel club member Kevin on 01 474 813767 (evenings) [Kent]
Posted
15 Apr 2005

For Sale Corbin seat and backrest to fit b/c prolink beleive to be a canyon ds all black very good condition, £250 [new price £500] Tel Geoff on 01789 294063 / 07960 489919 or email Geoff Haines on this link
Posted
12 Apr 2005

For Sale Click to see larger viewClick to see larger view
Silver T reg CBX1000A in truly superb condition. 16K miles. £4495 ovno. Genuine reason for sale, includes workshop manual. Extra set of bodywork and wheels to sell seperately.
Tel: Mark on 07811 675816 [Lincolnshire] or email Mark on this link
Posted
24 July 2005

Wanted Parts wanted for 1979 CBX 1000Z. I have recently bought a South African Z model which I would like to convert to UK spec. The parts I'm looking for are:
  • Footrest Hangers LH and RH.
  • Gearshift pedal tie / linkage rod.
  • Brake Pedal Spindle.
  • An undamaged Instrument Under-Cover.
Tel: Chris Smith on 01494 481481 or mobile 07771 613688 or email Chris on this link
Posted
5 July 2005

Wanted Set of normal (low) bars for z model. Email Keith on this link
Posted
4 September 2005

Wanted 1000Z rear caliper. Tel: Steve (Non member) on 0118 981 26306 [Basingstoke] or email Steve on this link
Posted
2 May 2005

Wanted Set of Rickman / Hondastyle crashbars to fit 1000Z or A model. Cash waiting. Tel: Mick Rowson on 01 727 825331 [Herts] evenings & weekends or 07760 382111 anytime.
Posted
17 April 2005

For Sale Click to see larger view1979 CBX Z Candy Red. Well maintained and in very good condition. 6 into 6 Pipemaster exhaust. S/S carry rack. Sensible mods done. £4700 Email Steve Hendrick on this link
Posted
9 July 2005

For Sale Click to see larger viewClick to see larger view
V reg red 1000Z. Fitted new engine 4000 miles ago which includes pro-link clutch. All cycle parts including bodywork replaced with NOS items apart from frame & wheels. Fitted with mint 6 into 6 Powerflow exhaust, Rickman bars and rear carrier. Includes toolkit, owners manual and factory workshop manual and parts book. 12 months MOT and taxed to Sept. Owned 8 years and maintained regardless of cost, genuine reason for sale. Would be prepared to accept a members pro-link plus cash in p/ex or £5,650 ovno. Ring or email for full spec. No time wasters or scammers please.
Tel: Alan Lynch on 0161 6834965 or email Alan on this link
Posted
20 June 2005

For Sale Silver CBX 1000 Z for sale, 30,291 miles. March 1981 – genuine UK supplied bike. Asking £4,000 (have spent nearly £2,000 in the last 6 months partially restoring and greatly improving a really nice bike). Very good order, used weekly and maintained and improved, restored by Mark Hutton at A&H Motorcycles – work done in 2004 as follows:
  • New Bridgestone Battlax tyres in July 2004 at 29,400 (£187.26)
  • Full carb tune and service at 29,746 at A&H Motors
  • Further restoration work at A&H Motors in September 2004
  • New Marving exhaust (at 29,951 miles) £395 plus VAT and fitting
  • New Koni stainless steel rear shocks (at 29,951) £300 plus VAT
  • New front brake pads, rear brakes rebuilt
  • Total of above work £1178.58
  • New seat (original one) and new S/S seat trim from CBX owners club.
  • New side panels ex owner’s club
  • New Honda tank badges ex David Silver
  • Workshop manual and a few other parts available
  • Plus Rickman bars re-chromed not yet collected (at A&H)
Kept in a heated garage. Paint work has a few marks and A&H have quoted £425 to do whole bike. Again not needed but would make bike concours.
Tel: Johan Denekamp on 07831 655771 or email Johan on this link
Posted
27 June 2005

Wanted Starter Motor in good to mint condition to fit 1000Z. A model or P/link one will do. Cash waiting for starter plus carriage or can collect if in Dorset area. Please help. Tel: Rod Stoner (club member) on 01 202 546786.
Posted
22 February 2005

For Sale We have come into possession of a very rare Blake Turbocharger for the the CBX. We've looked it over and it is the complete set up and looks great. We can send pix to interested parties. The pipe is non bluing as are the exhaust tubes and outside of the compressor. All of these have been Jet Hot Coated. System includes an R42 Mikuni carb that has been polished and jetted to the system. We are told that with system running 7 lbs of boost the CBX it was mounted on made 150 hp on a rear wheel dyno. It can run from 3 to 18 lbs of boost depending on how well you have beefed up your motor and how brave you are! We no instructions to send with the unit so this one is for the experts out there.

We are offering this system on a bid basis with bidding starting at $4000. High bidder by midnight June 30, 2005 gets the system. We are offering this system to the CBX community first but if it remains unsold after June 30 it will go up for sale elsewhere.
www.cbxman.com
Posted
17 June 2005

For Sale
  • 2 Z Petrol caps, new unused conditon £22 each.
  • 1 Z side stand with rubber new unused condition £50.
  • 1 Z vacuum tap fuel shut off kit inc new petrol tap, still in honda packaging, why risk the dreaded hole in one!! £75.
  • 1 Z sales brochure featuing full frontal of the engine on the front cover, opening out to show the red and silver Zs on the center fold, 9 out of 10 condition £40.
  • 1 Z sales poster showing a silver Z lent over, and the full Honda range for that year on the rear 10 out of 10 condition £20.
  • 1 Z number plate bracket, new unused condition £35.
  • 1 Z new original right hand side panel still in Honda packaging £50 inc decal.
Tel: Ian Billingham on 0116 2776582 [Leicester]or email Ian on this link
Posted
25 June 2005

For Sale Click to see larger viewClick to see larger viewT reg Silver 1000Z. New original seat cover, Marving exhaust, Rickman bars, toolkit, Rickman rear carrier & new battery. Full service by club tech advisor Mick Whitnell and all MOT's and history. 35,000 miles. VGC. £3500 o.n.o Tel Roger anytime on 01 322 227127 [Essex]
Posted
26 May 2005

For Sale All parts for a 1000Z and for sale to members only and plus p&p
  • Brand new throttle rubber grip - £10.00
  • The black Engine sprocket cover (magnesium) with fixing bolts - £50.00
  • Mint repainted red front mudguard - £75.00
  • Pair of side panels, slight damage - £20.00 the pair.
  • Red tailpiece with two very small scratches - £50.00 & one that needs repainting - £20.00
  • Pair genuine FVQ rear shocks - £40
  • Headlight, chrome & glass parts - £20.00
  • Handlebar switches 2 X lefthand 1 X r/hand - £40 each
  • Front master cylinder, needs work - £20.00
  • Pair of mirrors, new but USA spec without acorn - £40.00 the pair
  • Mint red tank repainted by dream machine - £250.00
  • Set of six finned exhaust flanges - £35 the set.
  • Alloy filler cap strap X 2 - £10 each. Filler caps X 2 £5.00 each.
  • genuine Z horns X 2 one very good at £45 one not so good £25.00
  • Dual seat retaining clips - £25 for pair + spare
Tel: Stuart Bromiley on 07904 912843 [Northeast] or email Stuart on this link for pictures
Posted
26 Apr 2005

Wanted Good serviceable Rear Brake Disc for Z Model. Preferred not drilled. Tel: Neal 07974 830261 or email Neal Charlton on this link
Posted
25 May 2005

For Sale All parts to fit uk CBX Z plus postage
1] Frame with v5 and been powdercoated in black £350
2] Headlamp brackets £25
3] Fuel tank flap in chrome £15
4] Standard type seat £60
5] Front footrests- pair £15
6] Rear brake master cylinder and reservoir £15
7] Horn unit £25
8] Headlamp complete-original stanley £60
9] Regulator £30
10] Rear indicator wiring protectors-pair £20
11] Rear light unit and lense £20
12] Ignition advance unit 422 type, improves prolink £25
13] Fusebox and cover £10
14] Sidepanels sprayed red £20
15] 3 new air filters in packets unopened £10
16] 3 new oil filters uunopened in packets £10
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
1 Mar 2005

For Sale Click to see larger view

1980 1000A model, Red, 25000miles. Totally standard with original exhaust. Purchased from D&K just five years ago. Includes w/manual and spare very loud 6 into 1. Good condition. £2995 ovno.

Tel: John on 01 978 759928 - if not in please leave a message & he will get back to you. [Wrexham, North Wales]
Posted
7 January 2005

For Sale Seat for sale, honda CBX 1000 z seat brand new £320. Members only. Tel Steve on 0191 2095755 / 07989270731 or email Steve Mcfarlane on this link
Posted
18 May 2005

For Sale Click to see larger viewClick to see larger viewImmaculate silver T reg CBX1000Z. Totally rebuilt just 1300 miles ago and now with 30K on the clock. Has new genuine Honda exhaust, seat, indicators, all cables and switch gear as well as new front mudguard and side panels, fuse cover and all new nuts, bolts and rubbers. A few parts have been chromed but is virtually standard and in mint condition. £4500 ono. No test pilots please. Tel Steve Mcfarlane (club member 6115) on 0191 209 5755 anyday after 11 a.m. or 07989 270731 [Northeast]
Posted
11 Mar 2005

Wanted Urgently a Pulser unit for 1000Z. Please help. Tel: John Froude on 0208 8786897 (evenings), work 0208 6408862 then press 2 or Email John Froude on this link
Posted
1 May 2005

For Sale Click to see larger viewT reg 1979 Red 1000Z in superb condition. 26100 miles, new exhaust, new battery & front tyre. Workshop manual. With new MOT so ready to ride away. Recent oil and filter change and dyno tested at 94bhp at rear wheel, 102 + at crank. £3250 ono. Tel club member Kevin on 01 474 813767 (evenings) [Kent]
Posted
13 Apr 2005

For Sale Click to see larger viewHonda cbx1000z cam cover needs polishing £40.00. Tel Kev Talbot on 07891 962049 after 9:30 am [Rugby] or email Kev on this link
Posted
1 Apr 2005

Wanted Steering stem for 35mm Z model. Email Keith Thomas on this link
Posted
18 April 2005

For Sale X reg grey Pro-Link 1000B. 32000 miles, crashbars. Marshall 6 into 1. £1800 ovno Tel Dave Croxford on 01 287 640603 anytime [Redcar]
Posted
15 Mar 2005

For Sale CBXZ for sale or Swap:
  • 1980 Red Z, VFR 750 gold wheels, Marvin 6-2 exhaust, Koni rear shocks and chrome mirrors, re-chromed chain guard and engine bars. Engine totally rebuilt by Mark Hutton of A&H Performance 4000 miles ago.
  • Comes with 2 complete engines, one totally in bits, the other with top end stripped down, both would require complete rebuild. 1 spare set of carbs, Only one rocker cover and 1 [rewound] starter motor between the 2 spare engines.
  • Also 2 spare Tanks, tailpieces and front mudguards, 1 set red [like new], 1 set Silver [in need of respray] 1 set re-painted comstar wheels. 3 swing-arms, spare set clocks in housing, spare set of handlebars plus various other bits and pieces
  • This bike is in need of a little tlc from someone who has both the time and patience that I have been unable to give. Now reduced to £2500 ONO for the lot, will not split. May swap + cash for a nice Z.
Tel: David Feeney on 07860 261011 (mobile) or email David on this link [Lanarkshire]
Re posted
16 Jan 2005

Wanted Rickman / Hondastyle crashbars for 1000Z. Cash waiting. Tel: Bill Hatherall on 07866 549441 [South Wales]
Posted
11 December 2004

For sale Parts for CBX1000Z unlesss stated otherwise - members only
  • Brand new red tailpiece for a 1980 model CBX A model (this is the one with the hatch) £105 including postage.
  • Two clutch covers, tatty but complete £25.00 each ono.
  • Early model Cam cover good condition £40.00 ono.
  • Front mudguard - black - needs spraying - no cracks £40.00 ono.
  • Black tailpiece painted with a silver stripe for a UK model (no hatch) £50.00 ono.
  • 1 pair of US handlebars from a CBX Z £30 ono need painting.
  • Plastic speedo / tacho casing lower £25.00 ono.
No scammers please.
Tel: Chris Burrows on 07900 348161 or email on one of these links Work Home [Alton, Hants]
Posted
11 December 2004

For sale Parts for CBX1000Z - members only
  • Set of three drilled brake discs which have covered less than 9000 miles £100 ono + p&p
  • Used clutch cover, good condition but lacquer starting to peel. £25 + p&p
  • One indicator stalk and lens off CB900F but believe will fit p/l. Good condition but no wiring £4 + p&p.
No scammers please.
Tel: Chris on 01997 414701 or email Chris on this link
Posted
5 December 2004

Wanted 1000z front master cylinder and petrol tap. Tel: Mark Webber on 01395 278249 or 07967 834536 or email Mark on this link
Posted
1 December 2004

For Sale Donated by Club member Mike White. Members only. Proceeds to club funds.
  • Pair front fork side reflectors for Pro-Link £12 + p&p
Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
20 Nov 2004

For Sale Set of z carbs fitted with stage 3 dyno jets and k&n filters (5 FILTER SET), £350 Tel James Kay on 01821 650459 anytime [Perth] or email James on this link
Posted
5 Apr 2005

For Sale Click to see larger viewOne set of pro link carbs in need of clean £135 Tel Kev Talbot on 07891 962049 after 9:30 am [Rugby] or email Kev on this link
Reposted
18 Mar 2005

For Sale Donated by Club member Mike White. Members only. Proceeds to club funds.
  • Pulser unit. £15 + p&p
Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
20 Nov 2004

For Sale Click to see larger view1980 CBX1000A in glorious original black with only 5950 miles indicated on the clock. In truly pristine condition apart from very small hole in underside of l/h silencer but includes spare brand new pattern exhaust. Comes with toolkit, workshop manual and parts book and as new Rickman bars fitted. Show or ride. No test pilots or scammers please. Now reduced to £4500 ovno. Tel Kev Talbot on 07891 962049 after 9:30 am [Rugby] or email Kev on this link
Posted
5 Mar 2005

For Sale
  • One set of pro link carbs in need of clean £135
  • One set of rickman engine guards in average condition £100
  • One set of six davida gauges used only once with adapters £70
  • CBX1000A model set of original disc brakes in good condition £50
Can supply photos on request.
Tel Kev Talbot on 07891 962049 after 9:30 am [Rugby] or email Kev on this link
Posted
12 Mar 2005

For Sale Click to see larger view1 off complete pro link clutch assy in very good condition with brand new ebc clutch plates and brand new heavy duty springs, includes spacers and correct bushes for conversion to z or a model. £160.00 Tel Kev Talbot on 07891 962049 after 9:30 am [Rugby] or email Kev on this link
Posted
15 Mar 2005

For Sale Parts for a CBX1000Z:
  • Pair original tank badges, reasonable condition. £10 the pair + p&p
Members only.
Tel Johan on 07831 655771 [London] or email Johan on this link
Reposted
30 Jan 2005

Wanted CBX b/c prolink rear brake disc, must be in good servicable condition, buy or exchange for other cbx parts. Tel: Geoff Haines on 01789 294063 or email Geoff on this link
Posted
14 February 2005

Wanted Urgently CYLINDER HEAD FOR ANY MODEL OF CBX in good or very good condition. Club member is a Brit living in France so please contact Mel with details. Please help if you can. Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link Otherwise, contact Tim on TAS-Landtech@wanado.fr
Mel or Tim's parents can arrange collection in the UK.
Posted
26 Feb 2005

Wanted Pair of UK spec 1000Z handlebars in mint to new condition. Cash waiting or exchange for other 1000Z parts. Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
25 Feb 2005

Wanted Brand new (second hand is not good enough) wheels and rear shocks for my cbx 1000z. Email Steve Mcfarlane on this link
Posted
30 Oct 2004

For Sale All parts to fit uk CBX Z plus postage
1) Z frame with v5, UK with lots of history and powdercoated black £450
2) Standard style seat, as new £60
3) Cylinder block £100
4) Footrest hangers pair £30
5) Front footrests pair £30
6) Horn £30
7) Sidepanels red pair £20
8) Original headlamp complete £70
9) Headlamp brackets £30
10) Front brake master cyl & reservoir £20
11) Battery box £10
12) Helmet lock with key £15
13) Rear brake caliper mudguard £15
14) Rear brake caliper peephole £10
15) Rear light unit no lense £10
16) Rear lense black £10
17) Rear lense us type £10
18) Rear indicator wiring protectors pair £20
19) Ignition lock & key £15
20) Ignition advance unit 422 type to improve prolinks £30
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
4 Oct 2004

For Sale Click to see larger view1980 V reg CBX1000Z totally immaculate with 29K on the clock. Jaguar metallic green bodywork, new tyres, goodridge hoses with all stainless bolts etc. Jama exhaust, coated gold wheels, rickman bars, JMC box section swinging arm, marzochi shocks with rebuilt brakes and master cylinder. Selling due to new project. Comes with 12 months MOT. £2400
May part ex for something interesting.
Tel: Adam on 01462 639378 [Bedfordshire] or email Adam on this link
does not check his emails very often!
Posted
4 Oct 2004

For Sale ~ Pair of wheels gold 5 spoke(cb900?) - £50.00
~ Z seat, stepped good condition - £50.00
Email Dave Snell on this link
Posted
18 Sept 2004

For Sale Tel Johan on 07831 655771 [London] or email Johan on this link
Posted
9 Feb 2005

Wanted CBX Z ignition switch. Tel: Chris Alger on 01788 541504 or email Chris on this link [Rugby]
Posted
24 Dec 2004

For Sale Parts for CBX1000Z - members only
  • 2 CBX Z rear mudgaurds (both halves) 1 cutdown slightly, 1 original, £100 and £120 each.
  • Pair z fvq rear shocks £40.
  • 1 set honda original tank decals (new still in packing) £30.
  • Complete z clutch assy £90.
Tel: Geoff on 01789 294063 or 07860 489919 (mobile) or email Geoff Haines on this link
Posted
2 January 2005

For Sale Parts for a CBX1000Z:
  • CBX1000Z original seat with trim and strap but cover split, hence £35. Ideal for recovering. + p&p. Members only.
  • Original seat with trim and strap but cover split, hence £50 now £35. Ideal for recovering. + p&p
  • Pair side covers with decals. R/H perfect, L/H one lug missing. £30 the pair + p&p
Members only.
Tel Johan on 07831 655771 [London] or email Johan on this link
Posted
13 Nov 2004

Wanted CBX 1000Z (UK spec)
Colour not as important as condition.
Willing to pay circa £4000.00, this figure commensurate with condition of machine.
Email Neal Charlton on this link [West Midlands]
Posted
2 Jan 2005

Wanted A set of CBX carburettors. Tel: Dudley Shearman on 01509 856337 or 07815 209108 or Email Dudley on this link [Leicestershire]
Posted
11 Jan 2005

For Sale Portable Generators:
  • 3 off SDMO Genesis 3000 models at £470.00 cash price (list price is £844.00). 3000 watts, 3.75kva, 115/240 volt, 50hz, single phase. Briggs vanguard 6hp 4-stroke, unleaded petrol, Number of sockets = 1 x 16a @ 115v & 1 x 16a @ 230v, 13-litre fuel tank gives 8.9 hours from full tank Recoil handstarter. Dimensions 580l x 420w x 450h Net weight = 32kgs. Complete with user / maintenance manual.
  • 6 off SDMO Djingo 2000 models at £430.00 cash price (list price is £750.00). 1600 watts, 2kva, 115/230 volts, 50hz, single phase briggs vanguard 4hp 4-stroke, unleaded petrol number of sockets 1 x 16a @115v & 1 x 16amp @ 230v 4-litre fuel tank gives 5.7 hours from full tank recoil hand starter. dimensions = 520l x 370w x 410h net weight = 32kgs. complete with user / maintenance manual.
These are all new and unused still in the box (No Warranty). These type of generators can be seen on justgenerators.co.uk at £569 and £539 respectivley.
Tel: David Feeney on 07860 261011 (mobile) or email David on this link [Lanarkshire]
Posted
16 Dec 2004

For Sale All parts for sale to members only. 1000Z parts unless otherwise stated. Also + p&p.
1) D&D 6 into 1 exhaust. Will fit all models of CBX. £75.00
3) Centre stand with tube, spring etc. £50.00
4) Spark unit (OK1) £75.00
5) Top & Bottom Yokes £45 the pair.
6) Font wheel with good tyre £40
7) Footrest hangers £20 the pair
8) Regulator / Rec £40
9) Calipers, front & rear £10 each
10) Front and rear wheel spindles complete with nuts £10 each.
11) Lefthand choke lever assembly £20
12) Handlebars £40 the pair
13) Front and rear discs £25 each
14) Front fork legs complete £60 the pair
15) Front mudguards for painting £15 each
16) Assoted carb parts POA
Tel: Stuart Richardson on 020 8595 4223 (Home) or 07900 421551 (Mobile) between 3 p.m. & 9 p.m. (On shifts) [Essex]
Posted
27 August 2004

Wanted Side stand for 79 Z as the one on mine is bent and fouls the exhaust! Email Mark Elliott on this link
Posted
13 August 2004

For Sale All parts for sale to members only. 1000Z parts unless otherwise stated. Also + p&p.
3) Davida braced chrome box section swinging arm with swinging arm spindle & splined rear. Only £125
5) Pair main oil pipes from oil cooler £30.00
Tel: 01745 827026 or email Mel Watkins on this link
Posted
13 August 2004

For sale Parts for CBX1000Z - members only
  • Rear tail light complete as new £10 + p&p
No scammers please.
Tel: Chris on 01997 414701 or email Chris on this link
Posted
5 December 2004

For sale Complete and working Z spark unit, wiring a little brittle at main plug, could use as is but easily sorted. £90 members only, includes postage to UK. Tel: Dave Peters on 01793 873133 or email Dave on this link
Posted
22 November 2004

Wanted A set of Rickman Engine crash bars. Email Steve Hendrick on this link
Posted
18 July 2004

For Sale ~ Z Center Stand, just been sandblasted and powder coated black, not bent or cracked £70.
Z Sales Brochures:
~ 1 Z Ultra Sport Six brochure showing a close up of the Z engine on the front cover opening out to several pages, very rare now, this one is in 8 out of ten condition £30.
~ 1 Honda Sport touring Catalogue showing a guy landing on a Parachute next to a Silver Z, featuring a large article on the Z, this one is in 9 out of 10 condition, £25.
~ 1 Honda Style 80s Catalogue showing a fully faired Z on the front cover, featuring all the accessories available for the Z, 8 out of 10 condition, £15
Tel: Ian Billingham on 0116 2776582 [Leicester] or email Ian on this link for pics.
Posted
20 November 2004

For Sale Click to see larger view

Red V reg CBX1000A, UK handlebars & clocks. vgc 22000 miles, history, Jama Bars & exhaust, MOT to Jan 05, new battery, workshop manual £2650 ovno.

Tel Paul on 07870 306828 [Birmingham] or email Paul Judge on this link No scammers please.
Posted
11 Nov 2004

For sale Click to see larger view

Honda CB750k6- showing 31,000 miles. Registered Aug 1976 Runs smooth and strong. New parts fitted; saddle, mudguards, mirrors, switchgear, ignition switch, 3 of the 4 exhaust pipes, forks, grips, brake pads, chain, sprockets, tyres, crash bars. £1500 worth of recent receipts. Got two new side covers ready for painting as old ones are cracked and been repaired, like they do! 30,000 miles showing on clock Mot’s and documents show 4,000 miles in last 12 years Comes with workshop manual, owner’s manual and factory parts manual. Handy if your called Rodney as the plate is ROD ***R!!! Even handier than that is the £80 fully comp insurance and 50mpg!!! Taxed and MOT’d till April 05. Totally original, still got yellow paint dots on fitted components. Real head turner. Genuine reason for sale £2750 ono…

Tel: Alan on 0161 6834965 (Home) or 07984 179407 (Mobile) [Manchester]
Reposted
15 Sept 2004

For Sale Brand new CBX1000A candy apple red tailpiece still in Honda wrapping £100+p&p. Prefer went to club member. Tel Paul on 07870 306828 [Birmingham] or email Paul Judge on this link
Posted
11 Nov 2004

For Sale Donated by Club member Mike White. Members only. Proceeds to club funds.
  • 1000Z tailpeice. Sprayed in primer and has been repaired (well) but just needs slight rubbing down and topcoat. With metal retain clips. £30 + p&p
  • Oil cooler complete with both oil pipes for 1000Z. Good condition. £25 + p&p
Tel Mel anyday between 10 am & 8 pm on 01 745 827026 or email Mel Watkins on this link
Posted
20 Nov 2004

Wanted CBX 1000Z rear Mudgaurd. Email Ian Padley on this link
Posted
2 Oct 2004

For Sale V reg silver 1000Z vgc, deep brace swinging arm but comes with standard one. Koni shocks, heavy duty fork springs new seals and back tyre, new chain and sprockets and Lazer 6 into 1. Includes w/manual & crashbars. £2000 ono. Tel: Shaun on 0131 458 4810 or 07813 723803 (non member) [Edinburgh]
Posted
10 June 2004

For Sale Very nice red 1000Z, V reg Canadian import. 26000KM. Jama chrome 6 into 2 and crashbars. Spare seat, owners handbook & workshop manual. Koni shocks. £2650 ono. Tel: John daytime 01 792 895995 or Johnathon 01 792 875122 evenings & weekends. [South wales]
Posted
6 June 2004

For Sale Nearly new marshall chrome 6 into 1 £200+p&p. Members only. Tel: John daytime 01 792 895995 or Johnathon 01 792 875122 evenings & weekends. [South wales]
Posted
6 June 2004

For Sale Black twin headlight half fairing to fit a Z. VGC. Only £50 + p&p. Members only. Tel: John daytime 01 792 895995 or Johnathon 01 792 875122 evenings & weekends. [South wales]
Posted
6 June 2004

For Sale ~ CBX 1000Z left handlebar switch secondhand but no damage £25.00. £3.95 postage.
~ CBX 1000Z right handlebar switch secondhand but no damage £25.00. £3.95 postage.
For sale as I managed to find some new ones. Members only please.
Email Ian Padley on this link
Posted
2 Oct 2004

For Sale CBX 1000Z, T reg, 1978, Red. 24,000 miles MOT’ed (UK bike). History with MOT’s going back to 1987. Many new / renovated parts, Tyres, wheels, Paintwork, Corbin seat. Chain, sprockets, springs and shocks, new electrics, Preditor S/S exhaust. VGC. £2995 ovno. Tel: 07899 791050 or email Mike White on this link [Welwyn Garden City, Hertfordshire]
Posted
4 Oct 2004

For Sale Two engines, both dismantled. One has big bore kit. £1000 ONO for the pair. Members only and plus p&p or collect. Tel: 07899 791050 or email Mike White on this link [Welwyn Garden City, Hertfordshire]
Posted
4 Oct 2004

For Sale Set of Z clocks showing 26K - £150 ono.
Set of Z carbs - £100
Members only and plus p&p.
Tel: 07899 791050 or email Mike White on this link [Welwyn Garden City, Hertfordshire]
Posted
4 Oct 2004

Wanted Clear, unscratched Fairing windscreen for CBX Pro-Link. Tel: Peter on 0870 785 5780 [South Gloucester] or Email Peter Dukes on this link
Posted
7 July 2004

For sale 1982 Y reg grey CBX1000B Pro-link. Good condition and fitted with Jama Exhaust. 42K miles. Runs well but now needs an MOT hence a bargain at only £1550 ovno. Tel: John on 01 792 523352 [South Wales]
Posted
14 September 2004

For sale Click to see larger viewCBXZ, 1980, Silver, chassis no. CB12020121 engine no. CB1E-2020182, mot & tax April 2005, 10K recorded miles, CMA 3 spoke cast wheels & fitted 140 section rear tyre, micron fork brace, Dresda swingarm with taper rollers & eccentric wheel adjustment, original rear shocks, Carbs totally rebuilt last winter with all new parts, new petrol tap, K & N airfilter, Marshall 6 into 1 exhaust, fitted with rebuilt twin pot (30mm) front callipers, stainless braided hoses front & rear, comes complete with original callipers & 6 into 2 exhaust, honda laminated workshop manual & parts list, special tools & 6 vacuum gauges, some new & old spares including a full set of carbs & Jama engine crash bars. £3,795 Tel: Reg on 01639 635091 (Home) or 07778 490981 (Mobile) [South Wales]or email Reg Woods on this link
Posted
18 Oct 2004

Wanted Standard UK spec black plastic mirror with the bulb type clamp at the base of the arm. Tel: David on 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
7 July 2004

Wanted 24212-422-000 centre gear selector fork preferably nos. Email Keith on this link
Posted
13 September 2004

Wanted CBX1000Z Silver tailpiece. Tel: Mark Hutton of A&H Performance on 01252 334635
Posted
8 September 2004

For Sale Click to see larger viewCBX 1000Z, UK bike, 30129 miles in silver, standard exhausts, indicators etc. 1978 T reg in excellent condition. Price reduced, now £3750 Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
26 July 2004

For Sale All parts to fit a UK Z, plus p&p: -
1) Frame with v5 powdercoated black £500
2) Headlamp brackets £40
3) Cylinder block £100
4) Chrome rail £30
5) Headlamp complete [stanley orig] £70
6) Chrome clutch and ignition covers with hydraulic clutch conversion, cylinder and pipe etc. £80
7) Horn £30
8) Mirrors std pair but cracked glass £30
9) Rear light side brackets £20
10) Sports seat £60
11) Footrest plates pair £30
12) Front footrests pair £25
13) Davida vacuum gauges set of 6 brand new adaptors and pipes and unused £90
14) Shim tool new and unused £5
15) Carb synchronising tool new unused £20
16) Right angle screwdriver for adjusting mixture screws, used £15
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
7 September 2004

For Sale CBX 1000Z T reg 1978. 24,000 miles MOT’ed (UK bike). History with MOT’s going back to 1987. Many new / renovated parts, Tyres, wheels, Paintwork, Corbin seat. Chain, sprockets, springs and shocks, new electrics, Preditor S/S exhaust. 2 spare engines, including bigbore, 1 set carbs, also other spares. £3,250.00 Tel: 07899 791050 or email Mike White on this link [Hertfordshire]
Posted
2 Oct 2004

For Sale 1979 T reg 1000Z. US import with high bars. Long MOT & Tax. Very nice blue with gold pinstrip paint job. Owners handbook 6 into 1 laser. VGC. 22K. £2500 firm, Carol Nash valuation £3500. Mature owner. Genuine reason for sale. Tel: Roger 01 708 743572 evenings and weekends [Essex]
Posted
23 May 2004

For Sale Spark unit with 1&6, 3&4 working 2&5 removed with one connector. Ideal to repair another one as per club mag. £40. (members only) Email Steve on this link
Posted
15 May 2004

For Sale All parts are from a 1000Z and for sale to members only. Also + p&p unless otherwise stated.
1) Two sets of exhaust colletts. £10.00 per set.
2) Set of six finned exhaust clamps. One has some damage. Hence only £25.00 the set.
2) Pair of front and rear footrest hangers for Uk Z. £40.00
8) Headlight bracket £40
10) Custom seat black with blue sides £95.00
Tel: 01745 827026 or email Mel Watkins on this link
Posted
12 May 2004

For Sale All parts for sale to members only. 1000Z parts unless otherwise stated. Also + p&p.
2) Z frame with V5 one of the last made. £300.00
Tel: Stuart Richardson on 020 8595 4223 (Home) or 07900 421551 (Mobile) between 3 p.m. & 9 p.m. (On shifts) [Essex]
Posted
27 August 2004

For Sale

: NOS CBX Parts:

: 37200-422-724 Speedo:0-240 kmh major scale, 0-150 miles per hour minor scale. New in box. $400 USD OBO.

: 37220-422-008 Trip Knob Speedo. New In Honda Bag.
: This is for resetting the trip meter on your speedo. $35 USD OBO. Fits above speedo and others.

: 84705-422-670 Bracket Set, Tail Light. This is the piece the licence plate bolts to and the rear winkers attach to. In original bag, just opened for first time to check. It is perfect. $200 USD OBO.

: 33703-422-673 Base Comp. Tail Light. New In Box. Stanley p/n HM-25RC This is the Tail Light Assy minus the lens. It includes reflectors, rubber mounts and lamp sockets. This would be the piece you would need if your lens screws are stripped out or the lamp sockets were corroded. Does not include wires or pigtails. $250 USD OBO.

: All the above are NEW OLD STOCK, not "near new" or "as new". They are in the original Honda packaging.

: The "422" middle numbers signify 1979 CBXZ, but they very often fit a 1980 CBXA, and occasionally a 81/82 CBX. All parts are as they came from the factory, nothing is missing or damaged. I can help you with 79/80 parts, but know very little of the 81/82 parts interchange with 79/80 parts.

: Email me for add'l info.

: "NOS - When Only The Best Will Do"

Email Tony MacNeill ICOA #0006 on this link
Posted
28 May 2004

For Sale ~ 1981 Z frame with log book - £200.00
~ 1981 Z engine running well until bike broken this week £850.00
~ 1981 Z red bodywork tank tail mudguard - £100.00
Email Dave Snell on this link
Posted
18 Sept 2004

For sale Click to see larger view

Totally mint red 1980 V reg cbx1000Z. Only 4000 miles since fitted with an as new engine which cost £5000 to build. Also has almost new Powerflow 6 into 6 stainless exhaust which cost £1200 fitted. As new Rickman / Hondastyle engine bars and rear carrier. Brand new seat, tank, shocks & forks. Stainless brake hoses. Comes with toolkit, workshop and parts manuals and owners handbook. And finally it is fitted with a pro-link clutch so no rattles! NO TIME WASTERS, INTERNET SCAMMERS OR TEST PILOTS NEED APPLY. A bargain at £5500 or consider p/ex for mint pro-link with full luggage plus £3000 cash. Would prefer it went to a member or prospective member. Bike featured on page 12 of CBX rider mag, summer issue.

Tel: Alan on 0161 6834965 (Home) or 07984 179407 (Mobile) [Manchester]
Reposted
11 Sept 2004

For Sale All parts to fit a UK 1979 Z and in excellent condition, plus p&p: -
1) Frame with v5 powdercoated black with history £500
2) Centre stand complete £100
3) Toolkit holder £10
4) Toolkit brand new and complete unused £45
5) Eddie lawson style sports seat £70
6) Standard type seat £70
7) Original seat but rip on top cover £40
8) Mirrors pair but glass cracked [orig] £40
9) Headlamp, rim and glass [stanley orig] £70
10) Coils set of 3 £50
11) Ignition stators and wiring etc. £40
12) Ignition advance 422 type £30
13) Oil cooler pipes pair £100
14) Oil cooler £30
15) Sidepanels in red pair £30
16) Rear indicator wiring protectors pair £20
17) Rear no plate side brackets pair £20
18) HT leads blue set of 6 £12
19) HT leads yellow set of 6 £12
20) Inner rear mudguard £10
21) Fuel tap £25
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
25 July 2004

For Sale Click to see larger viewV Reg Silver 1980 CBX1000A. 27000km. All new paint job and decals. Rechromed forks and seals. New starter motor. New brake seals and pads. Stainless steel brake hoses. Seat recovered. Over £2000 spent on rebuild. 12 Months Mot & 6 Months Tax. Phone for full details. £2250 ono. Tel: Mitch on 01298 72157 or 07768 924201 mobile [Derbyshire] or email Mitch Todd on this link
Posted
3 July 2004

For sale Silver T reg 1000Z vgc 23K and fitted with two year old chrome 6 into 2 BSM exhaust. Still have original but tatty. Crashbars (need chroming), toolkit & owners manual with wallet. Only two owners and owned by me since 1981. £2950 ovno. Tel: David evenings & weekends on 01 677 422797 [North Yorks]
Posted
29 Apr 2004

Wanted ~ Wanted set of carbs in good condition for 1000Z or swap for Z1 set.
~ CBX1000Z brochures. Must be mint. I want one to frame and one for collection. Have various brochures to swap if required.
Tel: Paul Huartt on 0191 4561652 [Tyne & Wear]
Posted
28 Apr 2004

For Sale All parts for sale to members only and + p&p unless otherwise stated.
1) Hard to find top rear engine brackets(2) for 1000Z or Pro / link £25 the pair.
2) R/H rear footrest assembly to fit Z or P/L. Rubber slightly worn. Two available £25
3) Priimary chain base assembly with rubber and oil pipe. Part no's 23160-422-010, 23166-422-000&23175-422-000. Have two in vgc £25 each.
4) Complete airfilter housing box with lid and hard to find fixing screws. vgc £35.
5) Gear shift spindle complete with both springs for 1000Z, A model or Pro/Link part no's 24610-422-000, 24641-422-000&24651-300-020 plus washers. Have two in VGC £10 each
6) Brand new valve springs for all models of CBX 1000. 14 inners and 2 outers £10 to clear.
6) Chrome cover for oil pipe next to gear lever. £25.00
7) Rear stoplight switch and wiring to fit all models CBX. £5 to clear.
8) Brand new clutch arm to fit all models of cbx1000 part no 22710-422-000 £10
9) Oil strainer casing plus gauze and gasket to fit all models of cbx vgc. £10
11) Pair rear chain tensioners with adjusting screw. May be off CB900 but fit 1000Z or A and when fitted you would never know the difference. £25
13) Two way joint for front brakes with brake fluid bolts £10 fits all models.
14) Complete oil pump apart from gauze. Fits all models. £15
17) Brand new clutch oil pump drive sprocket (fits behind clutch) still in Honda wrapping. £15. Fits all models of cbx part no 15131-422-000
19) Oil filler cap for all models of CBX £10
20) Brand new complete needle valve set for one carb of 1000Z. Part no 16012-422-004 still in Honda packet, £5
21) Petrol tap £20.00
22) Brand new holder set (thats what it says in parts manual!) part no 16030-422-004 looks like part of main throttle cable assembly on carbs. Still in Honda wrapping. £5
23) Six branch overflow joint for Z or A model. part no 16310-422-305 vgc £5
Tel: 01745 827026 or email Mel Watkins on this link
Posted
28 Apr 2004

Wanted CBX MPH speedo with about 27k on it. Have one to swap with 13k on it or will buy. Email Ed Willett on this link
Posted
23 Apr 2004

For sale Click to see larger viewClick to see larger view

Genuine Hondaline CBX T-Shirt for sale circa 1979, imported from USA. Yellow with CBX logo on front and large printed image of CBX engine on back. Colour has faded from new, but no marks or tears. Great collectable item & in excellent condition for age. £15 + p&p

Tel: Peter on 01704 540897 or email Peter Jones on this link [Southport, Merseyside]
Posted
22 Apr 2004

For sale TIMs is back bigger than ever - most items in stock - we WILL SHIP KERKERS AND DG'S TO YOU GUYS - dyna coils are now here - yeah - hp - hp - hp - big bore kits - taylor wires - paint exchange - alternator rebuilds - carb rebuilds - call now for pricing. TIMS CBX Web Site
Posted
22 Apr 2004

Wanted Right hand front brake caliper for 1000Z. Will consider buying pair if you don't want to split. Tel: Peter on 07970 890737 [Tavistock, Devon] or Email Peter Heal on this link
Posted
18 July 2004

For Sale 1981 X reg grey pro-link. Only 13100 miles MOT & TAX vgc. Crash bars & owners handbook. Bargain at £1950 ovno. Tel: John 01 676 530785 [Birmingham area]
Posted
13 August 2004

For sale W reg silver 1000Z only 5000 on the clock. Presently fitted with aftermarket 6 into 2 but also comes with original system. Very nice condition £4000 firm. Tel: Mick on 01 932 429781 or email Mick on this link [Surrey]
Reposted
13 Apr 2004

For sale Click to see larger view

Red 1979 T reg 1000Z. Only second owner since new and have owned from 1982. Full history including original bill of sale and most MOT's, Owners handbook, full toolkit and workshop manual. 37K nice bodywork but fitted with Dresda swinging arm and marzocchi shocks. Fitted with Tomaselli clipons but have original bars so would not take much to bring back to near standard. Laser 6 into 1. Centre stand removed but comes with bike. Rickman bars. MOT. £2750 ono.

Tel: Mick on 0115 9223798 anytime [Nottingham]
Reposted
10 Apr 2004

For sale 1981 grey pro-link fitted with stainless 6 into 2 and custom built rear carrier plus full Honda luggage together with large quanity of spares including spare engine. Package includes, spare carbs, JMC swinging arm, crash bars, spare calipers, bike fitted with 6 pot calipers, fork yokes, stainless bolts, fork brace, spare seals, spare brake pads, spare set of indicators, headlight & petrol tank. 9 spare cam end caps, 6 spare crank end caps and a number of new gaskets and manifold rubbers. Will take £4000 for the lot. Genuine reason for sale. Tel: Geoff on 01 273 586016 anytime. [East Sussex]
Posted
3 Apr 2004

For sale Ignition pulser & rotor for 1000Z £50.00 Tel: Malcolm on 0121 782 5264 or email Malcolm on this link [Birmingham]
Posted
28 Mar 2004

For sale ~ rolling chassis from a 1981 import model CBX 1000z with the log book ready to use £600.
~ complete font end & rear wheel from a kawasaki zzr600 would look great on a cbx project £250
~ GS750 engine complete & a 1100 zephyr engine complete ideal for a chop or winter project ring for details
~ CBX workshop manual (photo copy) £10 + postage.
Tel: Andrew Trayte on 07944 742294 or email Andrew on this link [London]
Posted
28 Mar 2004

For Sale Immaculate CBX C pro-link frame black powder coated with v5 and mots £450. Pro-link mono - shock serviced with swinging arm fitted with new bushes first class condition £250. Pro-link rear wheel spindle and nut £20. Tel: Peter on 01889 567992 or mobile 07743 753928 or email Peter Clift on this link
Posted
16 June 2004

For sale A CBX 1000 5 spoke com-star rear wheel in fair condition, has the markings DiD JAPAN MT2.15x18 and is still fitted with a drilled disk and a 35 tooth sprocket both good used spares. Bargain at £15 preferably from a club member. Tel: John 07890 904953 or email John on this link [Stoke-on-Trent]
Posted
24 Mar 2003

For sale Silver grey 1981 X reg pro-link. Less than 13K on the clock. Good condition with after market 6 into 2 exhaust, crash bars & owners handbook. No luggage. All MOT's still held. £2250 ovno. Tel: John (non member) on 01 676 530785 [Midlands]
Posted
21 Mar 2004

For Sale All parts from a UK 1979 Z and plus p&p: -
1) Carburettors, set of 6 bought as spares but never used £140
2) Coils set of 3 £75
3) Magi boxes {ignition igniters} set of 3 £75
4) Ignition pick ups and wiring set of 3 £50
5) Wiring loom - main £100
6) Wiring loom-engine £20
7) 6-1 downpipes and collector box, black chrome £80
8) Ignition advance unit, 422 type improves prolink engines £30
9) Fuel tap £25
10) Footrest hangers, pair £40
11) Front footrests pair £40
12) Oil cooler £30
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
29 May 2004

For sale Click to see larger view

Totally standard V reg Red 1000Z in immaculate conditon with just over 14k genuine miles on the clock. Mint original Honda factory exhauast fitted and Rickman bars. Spare tailpiece, W/man. Tax & tested for 12 months. Featured in Classic Mechanics in June 95 issue 92. Genuine reason for sale. Bargain at £4500 ovno. No time wasters please. You will not get one better at this price. No dealers or canvassers.

Tel: Bill Berry anytime on 01 934 713436 home or 07793 604370 mobile [Somerset]or email Bill Berry on this link
Reposted
22 Jun 2004

For sale CBX tyre pressure chain guard stickers (specially made, no longer available from Honda). £4.00 for each including postage. Tel: Nick Hare on 01732 220493 or email Nick on this link
Posted
8 Mar 2004

For sale 1) A set of black Krauser panniers and top box. The panniers are 36lts and the top box 40lts. All fittings, lights, frame and instructions for fitting to the CBX. £375 ONO.
2) Unused hydraulic workshop stand (lift). Has a 3 ton jack and is certified up to 500kgs. Lifts to a height of about 17". At the moment I can't find the jack handle. This item is far too heavy to post. £115 ono.
Tel: Mike on 01328 700341 or mobile 07740 440041. [Norfolk] or email Mike Harrall on this link
Posted
12 Apr 2004

Wanted CBX 1000Z tank. Tel: John Jackson on 01977 645512 or email John Jackson on this link
Posted
5 Mar 2004

Wanted ~ L/H dash indicator lens.
~ R/H passenger pinion peg.
~ Top end gasket set. Including valve stem o/s's and rocker cover bolt rubber gromets.
Email Bob Johnson on this link
Posted
5 Mar 2004

For Sale Click to see larger view

1980 V reg CBX1000Z totally immaculate with 29K on the clock. Jaguar metallic green bodywork, new tyres, goodridge hoses with all stainless bolts etc. Jama exhaust, coated gold wheels, rickman bars, JMC box section swinging arm, marzochi shocks with rebuilt brakes and master cylinder. Selling due to new project. Will come with full MOT when sold. £2700

Tel: Adam on 01462 639378 [Bedfordshire] or email Adam on this link
does not check his emails very often!
Posted
25 Feb 2004

For Sale Registration plate V6 CBX. It's on retention and I'm looking for £599.00. It could not be put on a CBX because of the age of the bikes, but an enthusiast could put it on a newer bike or car. Tel: Tim Nadin on 07976 295465 or email Tim on this link
Posted
23 Feb 2004

Wanted Chrome Rack - Rickamn Hondastyle one which fits either the Z or the A. Tel: David on 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
13 May 2004

Wanted Set of Crash bars for a 1000Z. Tel: David on 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
19 June 2004

For Sale All parts for sale to members only and + p&p unless otherwise stated.
15) Complete left handlebar choke and clutch assembly for all models. £20
21) Brand new fuel joint pipes (2) to link carbs 1000Z part no 16033-422-004 still in Honda wrapping. Includes O rings. £5
1) Brand new large rubber overflow pipe, part no 16316-422-010 fits behind carbs. Still in sealed Honda packet. No longer available. £12.
4) Starter solonoid good used. For Z, A or p/l £10 - postfree.
1) Six into two exhaust.Chrome cans and black pipes. Not mint but complete and legal hence £150.
11) Chrome seat rail, good chrome apart from a peeled scratch about an inch long. May need re-chroming hence only £45.00
15) Set of coils £30.00
19) Horn £25.00
10) Flasher unit fits all models of CBX £5
18) Speedo drive gearbox for front wheel 1000Z. vgc £20.
4) One only original 1000Z Uk model mirror. Fits left or right as mirror reversable. Very slight marks on the plastic but otherwise very good. £15.00 + p&p
Tel: 01745 827026 or email Mel Watkins on this link
Posted
12 May 2004

For Sale V reg red 1000Z. Featured in Spring, Summer & Autumn 2002 club mag. Includes owners handbook, W/manual & vac guages plus a some tools. Very reluctant sale due to ill health. 26K miles £2500 Tel: Bob anytime on 01 253 697360 or 07855 015257 [Blackpool]
Posted
23 May 2004

For sale Full set of clocks for CBX, KPH speedo. Fair condition. Tacho has had one of its face plate screws drop out, hence: The whole set for £85 + carriage & packing costs. Tel: David on 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
12 May 2004

For Sale Silver T reg 1000Z together with spare engine and cylinder head. Plus many other items included. 12 months MOT & 5 months tax. £2500. Tel: Keith on 01 787 280168 or email Keith on this link [Suffolk]
Posted
19 June 2004

For sale Red T reg 1000Z vgc 26K and fitted with Cowley black chrome 6 into 1. W/manual plus a few spares. £2650 ovno. Tel: Kevin on 01474 813767 [Kent]
Posted
29 Apr 2004

Wanted I am looking rear wheel axle [spindle] for my CBX prolink B model 1982. Unfortunately when I fitted a new rear tyre the thread stripped and I can no longer tighten the rear wheel neen bolt as well. Email Louis Masters on this link
Posted
7 June 2004

For Sale Click to see larger view

A registered 35,000 miles, owned bike for 15 years, Z engine dynojet stage 3 kit K AND N filters laser 6 into 1 alloy end can, Dymag wheels new Pirelli match tyres, Cerrani upside down forks, Spondon adjustable yokes, Spondon 320mm floating discs, Spondon 4 piston calipers, Spondon alloy clip-ons, Twin Cibie headlights Original moto matin body work, some damage on fairing some bubles on paintwork, Goodridge hoses to brakes and oil cooler, The bike is in good condition I must stipulate this is not a show bike it has been used, PRICE £4,500. Includes spare 6 into 2 ledar exhaust, spare ferrodo brake pads, paddock stand, genuine honda workshop manual, plus various other bits.

Tel: Philip Eccles on 01422 240166 (after 6pm) [Halifax, West Yorkshire] or email Philip on this link
Posted
24 Mar 2004

For sale F1 sidecar chasis that needs some love and a good home. It is in a poor state i.e. no fairings and swing arm. I just wish it not to be scrapped and therefore for free to a good home. Tel: Nick Hare on 01732 220493 or email Nick on this link
Posted
21 Mar 2004

Wanted Tailpiece for '79 "Z" colour not important but not damaged or repaired is a must, will consider complete seat. Tel: David on 01555 890146 or Mobile 07860 261011 or email David on this link
Posted
4 Feb 2004

For Sale ~ Set of four indicators for 1000Z vgc £90 + p&p (members only)
~ 1000Z Airfilter gauze housing £10 + p&p (members only)
2) Rubber battery box liner vgc £10 - postfree.
3) Brand new clip to hold aircleaner in its housing £5 - postfree.
4) 1000Z frame with V5 Nov78 T reg. £350.
5) Complete 1000Z engine with carbs 10471 documented miles and only done 2425 in last eleven years since re-shimming. £1350.
6) Box section and braced chrome swinging arm for 1000Z £225.
6) Complete fuse housing with lid and fuses for top of forks. Fits Z, A or p/l £10
22) Chromed oil pipe cover. The one next to rear brake pedal £15.00
23) Full set of mint red bodywork (unmarked) P.O.A.
7) Trip meter knob in mint condition £5 postfree.
Tel: Mel on 01745 827026 or email Mel Watkins on this link
Reposted
4 Feb 2004

For Sale ~ Brand new shims various sizes £1.00 + p&p (Members only)
~ 1000Z front brake master cylinder plastic res housing. £10 + p&p (Members only)
~ 1000Z good used brake hoses £5 each + p&p (members only)
~ Various nuts, bolts, spindles and hard to find small items for 1000Z, just ring or email. I might have what you are looking for! (Members only)
~ Set of conrods to fit either 1000Z or p/l £30.00 + p&p (Members only)
Tel: Mel on 01745 827026 or email Mel Watkins on this link
Reposted
27 Jan 2004

For Sale 1980 W reg blue CB900FA vgc with new seat & silencers. Haynes manual. 30K £1,350 ono. Tel: Pete on 01 453 765636 [Glos]
Posted
21 Jan 2004

Wanted Pair of High level Handlebars for a Pro-link and the relevant longer cables. Tel: Tony on 07976 355740 [Kent]or email Tony Smith on this link
Posted
18 Jan 2004

Wanted Private CBX enthusiast seeks '78 or '79 CBX1000Z in genuinely excellent / mint condition. Low mileage, originality and excellent / mint condition most important. Happy to travel anywhere in the UK for the right CBX and to pay a very fair price. A good home for your treasured CBX guaranteed. Tel: Martin Young on Mob: 07801 596760, Work: 01273 427077, Home: 01273 559984 or email Martin on this link
Posted
21 Jan 2004

For Sale All parts from a UK Z and plus p&p: -
1) 1980 uk frame with v5 and MOTs been powder coated £500
2) Centre stand complete £100
3) Footrest hangers with front and rear footrests, pair £75
4) Toolkit holder £10
5) Fueltap £25
6) Standard seat with strap but torn £40
7) Sidepanels in red, pair £40
8) Coils set of 3 £100
9) Set of magi boxes £100
10) 6 into 1 downpipes and collector box £80
11) Chrome clutch and ignition cover, drilled for hydraulic conversion £70
12) wiring loom £100
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
28 Mar 2004

For sale Click to see larger view

Honda CB400F2 Bergundy 1977 (S), New genuine Honda complete exhaust system, clutch, seat, front mudguard, taper-roller head races, & lots of other new parts recently fitted. Long MOT & new tax. Sweet engine (37K). Price reduced, now £995. Reason for sale: I can't ride 3 bikes @ once, & I spend all my time on the CBX!

Tel: 01202 875566 [Bournemouth] or Email David Bicker on this link
Reposted
12 May 2004

For Sale / Exchange Pro-Link Rolling chassis in pearl white (No V5) £1000 firm or exchange for CBX engine. Tel: Laz on 01275 875700 [Bristol area] or email Laz on this link
Posted
17 Feb 2004

For Sale Pro-Link alternator, good condition but no bolts to fix to crankcase. £300 ono. Tel: David Carroll on 0208 460 4407 home or 07940 420531 mobile [Kent]
Posted
15 Jan 2004

For Sale A few replica seat straps with polished stainless fittings £35 each post free. Two only replica straps with no fittings £8 each post free. (members only) Tel: Mel on 01745 827026 or email Mel Watkins on this link
Posted
15 Jan 2004

Wanted Pair of pro-link handle bars, low euro spec type. Tel: Alun on 01276 685647 or email Alun Jones on this link
Posted
3 Jan 2004

For sale ~ CBX Speedo KPH, showing 63K £35
~ CBX Voltmeter VGC £25
~ CBX Tachometer VGC £45
~ CBX clock housing assy complete £30
OR: buy complete set c/w its wiring £110
Prices are + carriage / packing, or buyer collects.
Tel: David on 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
2 Apr 2004

For sale Click to see larger view

Honda CB400F2 Bergundy 1977 (S), New genuine Honda complete exhaust system, clutch, seat, front mudguard, taper-roller head races, & lots of other new parts recently fitted. Long MOT & new tax. Sweet engine (37K). £1195. Reason for sale: I can't ride 3 bikes @ once, & I spend all my time on the CBX!

Tel: 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
4 Apr 2004

For sale Click to see larger view

Honda VFR750F Met Black 1990 (G) Gear driven cams, fully faired, Excellent engine (42k). Has optional single-seater cowel too. New battery, taper roller head races & new back tyre. Also new MOT & tax. £1495. Reason for sale: I can't ride 3 bikes @ once, & I spend all my time on the CBX!

Tel: 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
4 Apr 2004

For sale Brand new Jama chrome 6 into 2 exhaust system still in original box, includes all colletts and brackets. Cost nearly £400. Will accept £250 + p&p. Members only need apply. Tel: Guy Baldwin on 01 469 535062 [North Lincs]
Posted
6 May 2004

For sale Honda CBX 1000Z, Treg, Red,1800 Genuine miles every MOT from new, never been apart new preditor stainless 6into1 (sounds great) 2 owners, original impressive classic reluctant sale £4250 Tel: Craig on 0151 280 0366 or email Craig Stevens on this link [Liverpool]
Posted
25 Apr 2004

Wanted Original spec. front wheel for 1000z, preferably new or mint condition only. Tel: Norman on 0191 427 0065 (home) or 07903 818293 (mobile) or email Norman Witherley on this link
Posted
10 Apr 2004

For Sale All parts for sale to members only and + p&p unless otherwise stated.
1) Three loose 1000Z carbs partly dismantled plus vac tap. Ideal for spares.£45 + p&p
2) Original soft cover 1000Z Honda workshop manual. Mint condition with no oily finger marks. Hard to find in this condition. Hence £40 + £6.55 special delivery.
3) Original Honda UK 1000Z Model Introduction Booklet. The orange one and as supplied to Honda mechanics before the cbx was launched. Cover has some soiling but contents clean and now very hard to find. Size A4 and thirty pages. £15.00 + p&p
3) Complete set of 1000Z bodywork in blue with tank badges. Ideal for a concours respray. No dents but some scratches on tank and tailpiece. Hence only £150 the lot.
4) Rectifier (pattern) for Z or A model. vgc £25
7) Headlight bowl £35.
9) Full set of clocks in housing with 10471 miles shown £150
12) Full set of Goodridges £35.00
12) Tacho to clear with small dent on upper rim. Some fading. Only £15
13) Chrome rear brake torque arm £15.00
14) Spark unit £75.00
16) Pair of 1000Z side reflectors. No brackets £10 the pair.
16) Original Honda rectifier £35.00
17) Flasher unit £5.00
18) Handlebar switches for Uk spec bike. £45.00
20) Set of handlebars which have been polished. Ideal for a special. £40 the pair.
# Rear light assembly complete for 1000Z to clear £10
# Rectifier (Honda original) for Z or A model. vgc £30
# Set of ten rubber inserts for cylinder head fins. As new. Fits all models. £10
Tel: 01745 827026 or email Mel Watkins on this link
Posted
28 Apr 2004

For sale All following parts for 1000Z to members only
~ Fairing now reduced to £50
~ Rear brake pedal now £10
~ Rev counter now £45
~ Lower clock housing (one mounting lug damaged) £20
~ Headlight bracket £40
~ Front and rear calipers / pipes etc. £40
~ Set of coils £35
~ Side panels (one upper corner missing and scratched) £15 the pair.
~ Toolbox £10.00
All plus p&p
Tel: Barry Wilson on 0115 849 1853 [Nottinghamhire] or email Barry on this link
Reposted
4 Mar 2004

For Sale Set of rebuilt Pro-Link carbs fitted with dynojet stage 3. Normal jets also available. £300.00 Tel: David Carroll on 0208 460 4407 or mobile 07940 420531 [Kent]
Posted
20 Dec 2003

For Sale Pair 1000Z tank badges, good used. £20.00+p&p (members only) Tel: 01745 827026 or email Mel Watkins on this link
Reposted
18 Dec 2003

For sale 1000Z with single shock conversion. Fireblade shock, dymag wheels, Ducati front forks and custom yokes. Comes with original wheels, forks brakes, mudguard and swinging arm. Best offer over £1750 secures. Email Richard on this link [Northern Ireland]
Posted
28 March 2004

For sale ~ Set of silver / black stripe body work from CBX 1000z £200 Tel: Andrew Trayte on 07944 742294 or email Andrew on this link [London]
Posted
28 March 2004

Wanted 1000z tailpiece, any colour but without the usual split down the middle. Email Colin Anthony on this link [Bristol]
Posted
7 April 2004

For Sale 1982 X reg Pearl White CBX-C Pro-Link Australian import in 1985 and had it ever since. New Tyres, chain & sprockets. Stainless brake pipes. Owners handbook and workshop manual. 36km Australian Transack exhaust. £2450 o.n.o Tel: Terry 01227 752288 or 07745 398991 [Kent] genuine reason for sale.
Posted
29 Nov 2003

For Sale or Part Exchange 1982 Honda CB900 Custom. USA import. 19000miles v.g.c. Twin gearbox 10 gears & shaft drive. Taxed & Tested £1000 o.n.o. Or will part exchange for CBX6. Tel: Roger on 01384 394228
Posted
26 Nov 2003

For Sale ~ 1000Z - Pro-Link set of four control cables in very good condition. Speedo, Tach, Clutch & Choke £25+p&p (members only)
~ 1000Z screw in forktop caps £15 the pair + p&p (members only)
~ Pair of Tommaselli chrome clipons for 1000Z £35 + p&p (members only)
~ Brand new pro-Link rear light lens. £10 + p&p (members only)
~ 1000Z or P/L Pair of crankcase endcaps. Just need a polish - reduced to £25 + p&p (members only)
Tel: 01745 827026 or email Mel Watkins on this link
Posted
20 Nov 2003

For Sale All parts from a CBX1000A (1980): -
~ Pair black reverse comstars £50 the pair.
~ Brand new black teilpiece lid £20.
~ R/H handle bar switch £20.
~ Set of coils £20.
~ Set of Taylor leads £20.
~ L/H & R/H set of high US spec handlebars £30
~ No2&No5 exhaust downpipes £30.
~ 85mph speedo 24K £40
Or sell as job lot £150.00
Tel: Paul Judge on 07870 306828 [Birmingham]
Posted
19 Nov 2003

For Sale Click to see larger view

CBX Z 1979 American import some years ago, some interesting history, new black powdercoating. New red paint, A model tail piece inc. toolflap. New pipemaster 6 into 6 stainless exaust, +lots more! Offers over £4000.

Tel: Geoff on 01789 294063 or 07860 489919 (mobile) or email Geoff Haines on this link
Posted
26 February2004

For Sale All parts to fit a Z and plus p&p: -
1) 1980 Z frame, UK bike with logbook and MOT and some history, been powder coated in black £500
2) Centre stand with spigot and spring £80
3) Footrest hangers with front and rear pegs etc. pair £75
4) Rev counter £30
5) Toolkit holder £10
6) Fueltap £25
7) Chrome fuel tank flap with key £30
8) Standard seat but has split £40
9) Sidepanels in red, pair £35
10) Cylinder block and liners £70
11) Exhaust flanges £50
12) Oil cooler £25
13) 2 sets of GPZ 600 carbs need modding to fit cbx £80
plus postage
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Reposted
8 Mar 2004

For Sale Click to see larger view 1981 X reg silver grey B model Pro-Link with 41K on clock. New chains and recent cylinder head rebuild. Crash bars, Full Honda luggage and very clean condition. Standard exhaust starting to blow hence only £2000. Tel: Adam on 01462 639378 [Bedfordshire] or email Adam on this link
does not check his emails very often!
Posted
25 February2004

For sale All following parts for 1000Z to members only
~ Mirrors in good condition £30
~ Horn in good condition £30.00
~ Pair chrome exhaust heat shields £40.00
All plus p&p
Tel: Barry Wilson on 0115 849 1853 [Nottinghamhire] or email Barry on this link
Reposted
4 Mar 2004

For sale Click to see larger view CBX 1000Z converted for drag racing / sprinting over the last three years and fully race ready. Spondon s/arm, discs, pegs etc. Wiseco 1147cc kit, Flowed head, lightened / balanced crank, Drag Race billet conrods. American Megacycle2 drag race cams, Racing / Hydraulic clutch parts, 31mm Keihin CR racing smoothbore carbs, Hagons, Dyna "S" ignition / coils, Scitsu Rev / counter, Swarbrick 6 into 6 open megga's, Hinkley Triumph wheels, 125bhp at the wheel, 10.6 at 135mph standing quarter and 151.9 flying mile. £4,500. Tel: Barry Wilson on 0115 849 1853 [Nottinghamhire] or email Barry on this link
Posted
23 Feb 2003

Wanted The brackets that hold the rear silencers to the rear footrest holder of a CBX B prolink - both sides. Email Louis Masters on this link
Posted
15 Mar 2004

Wanted also near side mirror. Tel: John Jackson on 01977 645512 or email John Jackson on this link
Posted
5 Mar 2004

For sale 6 into 2 powerflow exhaust, the down pipes are the usual mixture of gold brown and blue, the silencers are in stainless steel and are in very good condition, looking for £150. Email Louis Masters on this link
Posted
4 March 2003

Wanted 6 into 2 system for a ’79 Z in very good condition. Preferably a Honda system or close copy. (Not too loud). Email Garry on this link
Posted
27 October 2003

For Sale All parts are from 1980 Z model:-
~ Std fork springs £20.00 (pair),
~ New upper / lower yoke set £50.00,
~ Frontwheel / tyre / discs £60.00,
~ Std oil cooler £25.00,
~ Rear sprocket carrier £25.00,
~ CBR1000 front end, complete with wheel (polished / gold), discs, calipers, polished forks / slab yokes to fit cbx £400.00,
~ Koni rear shocks £50.00,
~ Set of "magi-boxes" £100.00,
~ Set of "used" std pistons / rings £120.00
Tel: Karl 01932 406326 or mobile 07747 030228 [Surrey] or email Karl on this link
Reposted
8 October 2003

For Sale All parts to fit a z and plus p&p: -
1) Performance wheels from USA, 3 spokes in alloy. Front uses stock tyre and rear being 4 inch uses 160, can use pirelli radials. Includes metmachex deep braced swing arm, torque arm and gsxr rear disc and caliper, all ready to fit £400
2) Twin piston honda calipers ready to fit £50
3) Drilled front discs £40
4) 1980 uk frame and v5 powdercoated £500
5) Wiring loom £100
6) Eddie Lawson style seat £70
7) Headlamp original and complete £80
8) Crankcases with numbers £150
9) Indicators set £150
10) Centre stand complete £80
11) Clocks set 37k £120
12) Forks with new stanchions and prog springs £70
....all in excellent condition and fits z, many other parts available.
plus postage
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
24 Feb 2004

For sale All following parts for 1000Z to members only
~ Centre stand £50
~ Front wheel with good tyre and discs £25
~ Rear wheel with good tyre & disc. No sprocket carrier £25
~ Full pattern fairing £100 o.n.o
~ Rear carrier with top box £50
~ Silver tailpiece, good condition £75
~ Rear light and number plate holder £40
~ Petrol tank. Needs a spray £50
~ Full set of footrests with fairly good rubbers £45
~ Rear Brake pedal £10
~ Gear change lever £25
~ Silver front mudguard Good condition £50
~ Wiring loom £30
~ Rev counter £45
~ Lower clock housing £25
~ Upper clock housing with warning lights £25
~ Headlight complete £45
~ Headlight bracket £40
~ Handlebars £40
~ Pair switches £45
~ Levers with clamps £25
~ Full set of indicators including chrome stalks £120
~ Set of barrels with set of pistons.Very good condition £100
~ Full set of four standard cams £50
~ Full set of rebuilt carbs fitted with dyno jet kit £120
~ Airbox £25
~ Side stand £25
~ Side panels, repaired and light scratches £15
~ Front & rear calipers with all pipes etc £40
~ Set of standard con rods, valves & springs £65
~ Steel box section swinging arm £50
All plus p&p
Tel: Barry Wilson on 0115 849 1853 [Nottinghamhire] or email Barry on this link
Posted
23 Feb 2003

Wanted 1000Z Centre Stand, must be in good condition, any reasonable price paid. Tel: Marjorie on 07989 408877 or email Marjorie Todd on this link
Posted
15 Feb 2004

Wanted Urgently wanted, set of Rickman / Hondastyle crashbars to fit an A or Z model. Not worried if they need re chroming. Cash waiting. Tel: Clive on 0116 223 2030 [Leicester]
Posted
17 Feb 2004

Wanted Grey Pro-Link, must have as much if not all service and document history, low mileage and in very very / immaculate condition complete with Pro-Link luggage. Email Robert Truss on this link
Posted
1 Mar 2004

For Sale All parts to fit a z and plus p&p: -
1) Performance wheels from usa alloy 3 spokes, front uses stock tyre, rear being 4 inch uses 160, with metmachex deep braced swing arm and torque arm, sprocket and carrier and all in alloy. Rear disc and caliper from Suzuki and all ready to fit straight on £500
2) Koni rear shocks as new in black / chrome £60
3) Twin piston honda front calipers pair and working perfect ready to bolt on £60
4) Drilled front discs pair £50
5) Prolink front forks 37 mm, top and bottom yokes with bearings and handlebars to fit Z / Prolink £100
6) Crankcases, top and bottom, perfect with numbers £200
7) GPZ 600 carbs req mods to fit cbx, x2 £100
8) Cylinder block £70
9) Standard seat, rip in top with strap £70
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
10 Feb 2004

For Sale CBX 1000Z Nos rear wheel for sale £300 plus post costs. Whilst still in original box the box has become soiled while in storage. Tel: Dennis on 01928 717624 or email Dennis on this link
Posted
11 Feb 2004

Wanted An original 6-1 exhaust for a Moto Martin. Tel: Reinhard Reeker on +49 (0) 541 682644 [Osnabrόck, Germany]or email Reinhard on this link
Posted
30 Sept 2003

Wanted I need the back half of a frame, I bought a frame and log book at the weekend but sadly someone has tried to convert it, it's only the back from the battery box backwards, where the seat sits on. So if someone has a frame that has had a front end thump I'm interested. I don't care if it's a prolink or a Z. Tel: Chris Burrows on 07900 348161 or email Chris on this link
Posted
23 Sept 2003

For sale Click to see larger view 1975 Honda CB750F1 - unfinished restoration project. 90% finished, new Motad 4 into 1 exhaust, new brakes, cables etc. inc new speedo & tacho cables. Tank, seat rear & side panels repainted by best pro painter in area, only wheels & front mudguard + few electric bits to do. Had engine out, professionally stripped, checked and replaced. Was running OK few months back. £950 ono. Tel / Fax: 01772 885622 [Lancashire] or mobile 07949 728859 or email Ron on this link
Posted
21 Setember 2003

Wanted CBX1000Z 1980, Pulse Generator required. Spark unit and coils OK, can anybody out there help to locate the required part? Email details to Kev Watkins on this link
Posted
19 Sept 2003

For sale X reg 1981 Grey Pro-Link. Good clean condition. 37,000 miles, MOT to Jul '04. £2,000 ono. Tel: Jim on 01 592 714433 [Fife]
Posted
16 Sept 2003

Wanted Good standard silver 1000Z in exchange for a mint (never seen rain) Suzuki TL1000R value £4000 / £4500 Yoshimura pipes and ohlins shock. V reg only 4447 very dry miles from new. [Cheshire] Email Steve on this link
Posted
15 Sept 2003

For sale Click to see larger view Click to see larger view Click to see larger view Click to see larger view Yellow Z, bike has only done 30 miles since total rebuild. Have all bills. £2850 ono. Tel: Dave Ayscough on 0161 366 1855 [Manchester] or email Dave Ayscough on this link
Posted
15 Setember 2003

Wanted Repro’s os engine bars or carriers for the CBX. Email details to Kev Watkins on this link
Posted
10 Sept 2003

For Sale ~ Full set of exhaust colletts to fit either Z or Pro/Link - reduced to £10.00+p&p (members only)
~ 1000Z plastic rear disc mudguard £10 postfree. (members only)
~ 1000Z brand new 4th gear mainshaft & 4th gear countershaft. £50 the pair or will split at £30 each + p&p no longer available from Honda (members only)
~ Brand new 1000Z speedo trip metre knob, still in Honda packet £5 postfree (members only)
~ Brand new still in wrapping clutch centre for 1000Z part no 22120-422-000 bargain at £35 + p&p (members only)
Tel: 01745 827026 or email Mel Watkins on this link
Posted
12 Nov 2003

For Sale All parts from a 1978 z and plus p&p: -
1) UK 1978 frame, unpainted and undamaged with original stickers, last 3 mot's and v5 £600
2) Crankcases, top and bottom, undamaged in silver with numbers £250
3) Performance wheels from usa, [like 2 sheets of alloy formed into 3 spokes] highly polished with drilled discs and honda twin pot calipers on front 2.15 inch and 4.00 inch on rear taking 160 tyre, with metmachex deep braced alloy swing arm, koni shocks and gsxr 1100 disc and caliper and alloy sproket, ready to bolt straight in. Seen at euro rally under marquee, professionally machined and fitted £700
4) Carburettors, dynojet kit and kn filters all cleaned and running perfect £500
5) Std airbox with lid and filter vgc £100
6) Std seat with strap but wants recovering £70
7) Cut down seat [eddie lawson type] £70
8) Forks with progressive springs and new stanchions £70
9) Tailpiece sprayed in red £60
10) Sidepanels sprayed in red £40 pr
11) Complete clock set all working perfect £150
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
2 Dec 2003

Wanted 1) prolink forks in good condition
2) bigger oil cooler to fit z.
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
4 Nov 2003

For Sale Set of Rickman crashbars immaculate condition, £120.00 Email Dave Snell on this link
Posted
18 Jan 2004

Wanted Workshop manual for a Pro-link. Tel: Tony on 07976 355740 or email Tony Smith on this link
Posted
24 Nov 2003

For sale A CBX 1000 5 spoke com-star rear wheel in fair condition, has the markings DiD JAPAN MT2.15x18 and is still fitted with a drilled disk and a 35 tooth sprocket both good used spares. Offers around £40 preferably from a club member. Tel: John 07890 904953 or email John on this link [Stoke-on-Trent]
Posted
7 Sept 2003

For Sale Click to see larger view CBX 1000Z, 1980 model having covered only just over 2000 miles from new, still on its original tyres! Original bill of sale, handbook and service book etc. £6,500.00. Tel: Graham Levine on 01663 741568 or mobile 07973 653798 or email Graham on this link
Posted
12 Jan 2004

For Sale For a Z :- Brand new still in boxes, Alloy locking foldover petrol tank coverplate and helmet lock assembly £30.00 the pair, or £20.00 each. Tel: Ron Parker on 01772 885622 or mobile 07949 728859 [Lancashire] or email Ron on this link
Posted
28 August 2003

For sale Italian import, great runner, marshall 6 into 1, V reg. Photos available if required. Can deliver if needed. Bike was taken in part / ex. £2450 ONO. Tel: Steve on 01159 138174 or email Steve on this link [Nottingham]
Posted
25 August 2003

Wanted CBX handlebars, I need specifically LH twin shock however will consider complete sets of twin shock or pro link Also need gear change lever complete for CBX. Email details to Kerry McGovern on this link [Austraila]
Posted
12 August 2003

Wanted A complete rear spindle for a 1000z including spacers but chain adjusters can be missing. Email Steve Courtney on this link
Posted
27 October 2003

For Sale ~ 1 x carb top £5.00 post free. (members only)
~ Brand new 1000Z replica seat trims in stainless produced to look like originals. Only one set left £40 post free.
~ Pair of front fork reflectors plus brackets for 1000Z £25 + p&p (Members only)
~ 1000Z alloy fork brace. £35 + p&p (Members only)
~ 1000Z rocker cover with s/h gasket small nick on lefhand side £25.00+p&p. All proceeds to club funds as donated by a member. (members only)
~ 1000Z or P/L lower clocks cover. Choice of two. £15 each + p&p (members only)
~ 1000Z or P/L handlebar switches £45 the pair + p&p (members only)
~ 1000Z pair of front fork reflectors plus fixing brackets. £25.00+p&p (members only)
~ Set of six finned exhaust clamps to fit Z or Pro-Link £30.00+p&p (members only)
~ Another set of six but with the fin on one clamp broken off. Hence (easily hidden) £25+p&p (members only)
~ Set of after market 1000Z clutch springs still in packet. Only £5.00 post free. (members only)
~ 1000Z rear brake fluid reservoir, choice of two. £5.00 postfree. (members only)
~ 1000Z alternator. Good plates and I am told has been fitted with new bearing and oilseal. The outer cover however has had it so only £35.00+p&p (members only)
~ Rickman Hondastyle rear carrier to fit 1000Z. Needs rechroming so only £60+p&p (members only)
~ Professionally strengthened 1000Z swinging arm. £45 + p&p (members only)
~ Mint pair of 1000Z handlebars with end weights £45 + p&p (members only)
~ 1000Z air cleaner housing with breather. £12 + p&p (Members only)
~ 1000Z Helmet Lock with key £15 + p&p (members only)
Tel: 01745 827026 or email Mel Watkins on this link
Reposted
26 Nov 2003

For sale Immac Y reg 1982 grey ProLink B model. Fitted with Jama exhaust and was featured in spring 1999 issue of club mag when owned by Hugh Davies MOT & TAX. Carbs recently cleaned and tuned. £2500 o.n.o. Genuine reason for sale. Tel: John any evening 01792 523352 [South Wales]
Posted
30 June 2003

Wanted NOS or mint LH switch unit must be clean and non faded as I've bagged a new RH and need match!!! Tel Alan Lynch, Home: 0161 683 4965, Mobile: 07984 179407 or e mail Alan Lynch
Posted
25 June 2003

For sale Full set of repainted p/l bodywork in bright orange. As new, £500 Tel: Russell Jarman on 07831 538167 [London / Kent borders]
Posted
24 June 2003

Wanted An alternator to fit a 1000Z. Tel: Mark Smith on 07747 716840 or email Mark on this link
Reposted
3 June 2003

For Sale Box section swinging arm and torsion bar to fit a 1979 Z (just removed from mine) I do not know what make it is but it comes complete with bearings and std parts will fit direct (ie chainguard). It is chrome plated but is pittered around pivot end and would actually look much better if re-chromed. £50.00 + actual postage costs, if no members are interested I will post on E-bay in near future. Email Alan Stubbs on this link
Reposted
21 October 2003

For Sale 1) z tank, tailpiece, f-mudguard and sidepanels all sprayed in a beautiful blue. Tank has cbx 1047 dohc etc {no stickers used} cost £400 as new and immaculate as seen at euro rally £550
2) z carbs with k&n filters and Dyno jet kit fitted (uk carbs) all set up and runs great and excellent condition £500
3) z lazer 6-2-1 black chrome road legal can (race can still available) £250
4) z exhaust 6-1 with modern d&d can fitted (can cost £600) very loud but does work, £250
5) z forks excellent condition with no pitting £ 70
.....all plus p&p
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
4 Nov 2003

For Sale ~ 1000Z Alloy fork brace. £30 +p&p (members only)
~ 1000Z centre stand, needs painting £50.00+p&p (members only)
~ 1000Z full set of indicators. With chrome stalks(some surface rust) £100 or another set without stalks £45.00 (members only)
~ 1000Z spark unit with set of coils £110+ p&p (members only)
~ 1000Z or P/L ignition switch with key. £25+ p&p (members only)
~ Plus another pair in good condition £30 + p&p
~ Flasher unit for 1000Z or p/l £5 + p&p (members only)
~ Candy Red 1000Z tailpiece. A few small marks but otherwise very shiny. £75.00 + p&p (members only)
~ Pair of Air Cleaner lid bolts for 1000Z no longer available from Honda £5.00 postfree. (members only)
~ 1000Z or P/L Voltmeter (mint) £30 + p&p (members only)
~ Pair of 1000Z mirrors good plastic & glass but stems need a coat of paint. Hence only £25.00+p&p no longer available from Honda. (members only)
~ Set of Rickman Hondastyle crashbars with rubbers. Need rechroming so only £60.00 (members only)
Tel: 01745 827026 or email Mel Watkins on this link
Reposted
2 Dec 2003

For sale ~ Genuine Honda fairing, grey and white, fully clocked with the wiring loom for those as well as the clocks. There's slight damage to one of the mirrors, but apart from that, it's in good condition with new pockets, £115.
~ Workshop manual in 4 languages (English, German, French and Spanish) dealing with all the models for all the various markets. It's a bit grubby due to use, but is in a ring folder, £30.
Tel Peter Hammond on 01376 331686 [Braintree] or email Peter on this link
Posted
19 July 2003

Wanted Wanted for a Z, clutch pressure plate (the one with the posts that take the bolts for the clutch springs). Or the whole clutch, any help very welcome as the engine is in bits and one of the posts is broken! Email Dave Snell on this link
Posted
26 Nov 2003

Wanted I am looking for a 1979 / 80 CBX1000Z, preferably candy red, and offer my 1998 Limited edition RS Performance VFR800 (No14 of 50 commissioned by Honda UK) in exchange or will sell for nearest offer to £4K. Email David on this link
Posted
14 Nov 2003

For sale 1978 Silver 1000Z, T reg, totally standard including crashbars & original exhaust 31K £3000. Tel: Phil 01 737 219636 [Surrey] If no reply leave message as on shifts.
Reposted
31 August 2003

Wanted Set of Mirrors for 1979 CBX1000Z. Must be good condition. Email Neville on this link
Posted
22 May 2003

For Sale Unfinished project. Complete set of 1000Z bodywork, mudguard, tailpiece, tank and seat. Just repainted metallic green. £450 ono. Frame same colour with V reg V5 £250 ono. Complete dismantled 1000Z engine. Good head but barrels shot, needs new chains, shells & alt bearing. £400 ono. Tel: Adam on 01462 639378 [Beds] or email Adam on this link
does not check his emails very often!
Posted
22 May 2003

For Sale Unused Laser 6 into 2 into 1. Black chrome pipes alloy can. Bargain £250 + p&p (Cost £465) Tel: Brian on 07905 632149 anytime or 01772 614034 evenings & weekends. [Preston]
Posted
18 May 2003

For Sale Copy 1000Z workshop maual, each page in plastic folder in four ring binder. £30 + p&p. Tel: Barry on 01609 779446 [Yorks] Ex Member.
Posted
17 May 2003

For Sale W reg red 1000Z, chrome crashbars, chrome Jama exhaust. 32K miles. Very good red bodywork but has recently gone on to four cylinders. I believe it needs a new spark unit. Therefore only £1900 ono. Tel: Jim on 07946 303275 anytime or 01274 563779 evenings & weekends. [West Yorks] Non member. (Bought ZX12!)
Posted
17 May 2003

Wanted ~ CBX exhaust system, not 6 into 1.
~ Pro/Link crash bars
~ Prolink rear indicator fitting brackets (standard)
Tel: George Garside on 023 8080 1232 (Southampton)
Posted
24 April 2003

Wanted Centre stand for CBX 1000Z Tel: Kevin Dobson on 01642 816212 or email Kevin on this link

For sale 2 x 1000Z. One silver, one red. May split if enough interest. Consists of one silver 1978, only two owners from new. Owned by me since 1990. Actual machine used by Honda in Hondaline brochure to advertise Rickman fairing & crash bars. New chain, large battery, Hagon shocks, brake seals & pads. Taxed & MOT, good tyres. 46K £2500. Also, Red Canadian Import with higher bars, fitted with gazelle 6 into 6 (cost £1500), Rickman bars, new battery, Hagons, Good tyres, chain etc Tax & MOT 46K £3500. In addition, complete original Honda exhaust system in good condition, racing 6 into 2, workshop manual & owners handbook, few original tools, filters etc. Will sell whole lot for £6500 firm. Genuine reason for sale. Tel: Martin on 01 273 517688 (East Sussex) evenings & weekends.

For Sale ~ 1000Z Owners handbook (the brown and silver one) £35+ p&p (members only)
~ 1000Z front headlight complete (thats glass and all plastic) £35+p&p also headlight bracket £45.00+p&p (members only)
~ 1000Z aircleaner cover with fixing bolts. £25.00+p&p (members only)
~ 1000Z silver tank. No dents but a couple of smallish scratches, hence only £75+p&p. Also have red tank with candy red starting to fade. £75+p&p. Red front mudguard Half inch scratch halfway down but otherwise ok. £35+p&p (members only)
Tel: 01745 827026 or email Mel Watkins on this link
Posted
12 Nov 2003

Wanted UK spec speedo (mph) to fit CBX. Can be CB900 or similar, ideal would be showing around 40k miles. Tel: 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
26 October 2003

For Sale ~ Stainless steel 6 into 2 made by predator and fits z model, no dents, marks or faults, been on bike a few months and bsi e11 approved. Cost £550 looking for £250.
~ Tank, front mudguard, sidepanels and tailpiece sprayed in a beautiful blue colour, excellent professional job not done on the cheap, paintwork cost £400. As seen on the modified z for sale at the euro rally, tank has cbx 1047, 24 valves, dohc and need I say more on the top, it seems a shame to spray it so would do a part exchange with your tank etc. z model no marks of any kind,
~ Engine crashbars fits z, chrome and bolts to engine mounts and covers to rear engine mounts, very good condition just slight peeling of chrome on weld, but can hardly notice £50.
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
15 Setember 2003

Wanted Kerker 6-1 not fussed whether chrome or black chrome. Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
15 Sept 2003

For Sale ~ Z forks no pitting, as standard £60
~ Z forks chrome bottoms but slight pitting £35
~ Top and bottom yokes £40
~ Many other parts as breaking for new project.
Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
21 Setember 2003

For sale Click to see larger view 1000Z, 1980, standard apart from VF750 gold wheels, Marvin exhaust, koni rear shocks. Engine totaly rebuilt by A & H Motorcycles 4K miles ago. Also two complete engines - one totally in bits and the other with the top end stripped down - both need rebuild. There is however only one rocker cover (brand new) and one starter motor which has been rewound so is now as good as new. Total package £3750 - no offers and will not split. Tel: Barry Brissenden on 01753 280187 or email Barry on this link
Posted
15 Setember 2003

For sale Click to see larger view Honda CB400F2 Bergundy 1977 (S), New genuine Honda complete exhaust system, clutch seat, front mudguard, taper-roller head races, & lots of other new parts recently fitted. New MOT & long tax. Sweet engine (37K). £995. Reason for sale: I can't ride 3 bikes @ once, & I spend all my time on the CBX! Tel: 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
4 October 2003

For sale Click to see larger view Honda VFR750F Met Black 1990 (G) Gear driven cams, fully faired, Excellent engine (42k). Has optional single-seater cowel too. New MOT & long tax. £1495. Reason for sale: I can't ride 3 bikes @ once, & I spend all my time on the CBX! Tel: 01202 875566 [Bournemouth] or Email David Bicker on this link
Posted
4 October 2003

Wanted Wanted Urgently, Pro / Link rear disc. Tel David on 07866 842442 or 01423 523041 [Yorkshire]
Posted
10 July 2003

Wanted Box section swinging arm for a 1000Z. Tel John Froude 020 8640 8862 then press 2 when connected. (work) [Surrey / London borders]
Posted
11 July 2003

For Sale Original 6 into 2 exhaust ( CBX Z ), excellent condition. No dents etc .... chrome is excellent. Offers around £300 or open to offers to swap for 6 into 6 exhaust system, cash either way. Or if anyone is placing an order with Pipemaster in Australia, please give me a call. Priority to club members first. Tel: Steve Hendrick 07801 074947 or email Steve on this link
Reposted
14 October 2003

Wanted Grey petrol tank for a 'C' Pro-link. Tel: Tony Smith on 07976 355740
Posted
24 June 2003

For sale Grey Pro-Link parts:- Front forks with top & bottom yokes but no stem £70, Airbox £10, Battery box £5, and rearwheel with good tyre, including disc & s/arm £125. Tel: Chalky 07956 627682 [Norwich] or email Chalky on this link
Updated
18 May 2003

For Sale ~ CBX Z engine, done 30k documented miles, engine, gearbox, clutch etc. all ok. Cranckcases etc. painted black, casings as alloy can be seen running and testdriven before removal. £1100 Tel: Ross on 0118 962 3269 home or 07790 808043 mobile [Reading, Berkshire] or email Ross on this link
Posted
21 Setember 2003

For sale Click to see larger view 
Click to see larger view 
Exhaust system has black chrome pipes with stainless cans & is made by Cowley in S Africa. They are in excellent condition & rust-free on the pipes with an excellent black chrome finish. £175 ovno. [Bournemouth] Email David Bicker on this link
Posted
17 Setember 2003

For sale Click to see larger view 
Click to see larger view 
A chance to own a rare & mint Honda CBX 1000Z full nut & bolt restoration using genuine honda parts. The bike is 100% standard UK bike with only 4,500 miles since rebuilt. Lots new parts e.g. Full exhaust system new tank, new clocks, to name a few thousands spent to restore the bike not your usual rubbish. £5,500 ovno. Tel: David Laughton on 01226 385846 after 6 pm in the week or any time at the weekend else email David on this link
Posted
15 Setember 2003

For Sale Black W reg 1000Z, 27K miles. Good runner. Fitted with Gazelle stainless 6 into 6. Chrome crash bars. Aftermarket shocks. Can be viewed in Scarborough after 3rd June. Will have new MOT when sold. £3500 ovno. If you want contact number get in touch with Mel [Tel: 01745 827026 or email Mel](Owners name is Martin who is not a member)
Posted
17 May 2003

For sale Click to see larger view "Z" Engine protection bars, chrome in quite good but not perfect condition. They are like the ones on the top inside cover of the spring club mag. £50 + £10 postage. UK only, club members first refusal. Tel: Dave Peters on 01793 873133 or email Dave on this link
Posted
24 July 2003

Wanted Click to see larger view Corbin seat (preferably with backrest) to fit CBX Pro-link. Tel: Andy on 07813 012375 or email Andy on this link
Posted
24 April 2003

For Sale All parts are from 1980 Z model:-
~ Std air box £50.00,
~ Tail piece £25.00,
~ Std fork springs £20.00 (pair),
~ New upper / lower yoke set £50.00,
~ Tarozzi rear sets on cbx mount brackets £100.00,
~ Rebuilt front calipers £45.00 each,
~ Frontwheel / tyre / discs £60.00,
~ Std oil cooler £25.00,
~ Rear sprocket carrier £25.00,
~ L/hand side panel (painted usual mount repair) £15.00,
~ R/hand side panel (painted, no repair to mounts) £25.00,
~ Front forks (with progressive springs) £80.00,
~ CBR1000 front end, complete with wheel (polished / gold), discs, calipers, polished forks / slab yokes to fit cbx £400.00,
~ Koni rear shocks £50.00,
~ Set of "magi-boxes" £100.00,
~ Set of "used" std pistons / rings £120.00
Tel: Karl 01932 406326 or mobile 07747 030228 [Surrey] or email Karl on this link
Posted
30 August 2003

For sale D&G six into one exhaust, the most free flowing one you can get. Fits Z or P/L vgc £200. Tel Colin on 01454 316972 [Bristol]
Posted
29 July 2003

For sale 1979 (T) Honda CBX1000Z - Silver - standard condition - 8500 miles - stored for last 3 years - £3,300 ono. Tel: Andy on 01652 658963 (evenings) or 07786 360334 (daytime) or email Andy on this link
Posted
23 Setember 2003

Wanted Pocket and locking cover that fits into the offside of fairing on a Prolink Tel: Chris Till on 01452 863558 or email Chris on this link [Gloucester]
Posted
7 September 2003

For sale Click to see larger view CBX "Z" 1979 U.S. spec with the crash bars supplied to the U.S. market. All in very good standard condition,excellent original exhaust system. £4000 firm. Tel: Chris Till on 01452 863558 or email Chris on this link [Gloucester]
Posted
25 August 2003

Wanted CBX1000Z 1980, Spark unit for cyl 1+6 has packed up. Can anybody out there hjelp to locate the required part? Email details to Kev Watkins on this link
Posted
1 Sept 2003

Wanted Rear carrier and or set of panniers to fit prolink b or c model. Can be Honda style or aftermarket kit such as Krausers. Cash waiting for right kit. Tel: Michael on 028 44615692. [Northern Ireland]

For sale 1981 X reg Pro / Link B model. Dry stored for ten years and not run for two. Carbs have been drained. Engine totally rebuilt in 92 with new barrels and pistons etc. Spare barrel & pistons included + other odds and ends. Jama exhaust but silencers need replacing. Owners handbook, toolkit and workshop manual. 60K miles. £1750 ono. Tel: David on 0228 512717 (Carlisle) [non member], If no reply try later as on shifts.

Wanted Laser or marshal 6-1 etc must be chrome but need not be immaculate - just reasonable. Tel: Steve Courtney on 01233 631302 and leave message or email Steve on this link
Posted
2 May 2003

For sale 1978 Silver 1000Z, T reg, totally standard including crashbars & original exhaust 31K £3000. Tel: Phil 01 737 219636 [Surrey] If no reply leave message as on shifts.
Click to see larger view Also, Ashbourne Rally award winning much modified 1000Z, new engine 2500 miles ago (yes, really), Performance machine polished wheels, special paint, 6 into 1 lazer & Dyno jetted. Bills for over £5K. Absolute bargain £3000 Firm.
Reposted
12 July 2003

For sale White Pro-Link 1981 model B. X reg, VGC with full set of luggage & tool kit. MOT. 33k £1,950 ovno tel Billy Wells 01942 723945 [Wigan]
Reposted
11 July 2003

For sale CBX Pro-link. C Reg. No. JEO 509X, 60,000 Miles, Very nice condition, C/W Luggage, Tool Kit (Complete), Owners Man. Workshop Man.
I have owned this bike for nearly ten years, and all this time it has being kept in a dry carpeted garage. As the bike has a six into one system, I am looking for £2300 but any reasonable offer will be considered.
Tel / Fax: 01782 772758, Mobile: 07860 334973 (Stoke On Trent) or email Kevin Taylor on this link
Reposted
25 June 2003

For sale I am breaking a CBX1000 which I will only be using the engine so have the following parts for sale:-
~ Exhaust – 6 into 2 – Kerker System – good condition. [£150]
~ Exhaust – 6 into 1 – unknown make – tatty but no holes. [£60]
~ Toolkit Holder [£10]
~ Complete set of clocks (speedo/rev/temp-idiot lights & surround + backing) [£150]
~ Polished master cylinder complete with lever. [£20]
~ Complete left hand switchgear [£30]
~ Complete front-end – yokes, forks, wheel, vent-discs, 2-pot callipers, handlebars + new headstock bearings and forkseals. [£150]
~ Rear wheel – complete with sprocket, disc, carrier, calliper, rear master-cylinder. [£80]
~ Complete left and right footrest hangers. [£50 each]
~ Also, just in case there are any interested parties, I have a Kawasaki ZX 6/7 headlight unit available at £100.
Tel: Bernd Raupach on 01793 330669 / Mobile: 07866 306183 or email Bernd on this link
Posted
1 August 2003

For sale Click to see larger view Red Z, 1979, approx 12000 miles american d AND G exhaust 6 into one. [see club mag winter 2002 page 14.] new o/s cam joints new tyres very tidy. £3250. Tel: Geoff Haines on 01789 294063 / 07860 489919 or email Geoff on this link
Posted
24 July 2003

For Sale 1000Z chrome Rickman / Hondastyle rear carrier. £75.00 + p&p. Also, pair of US spec 1000Z big handlebars. £25 + p&p Tel: Ron Parker on 01772 885622 or mobile 07949 728859 [Lancashire] or email Ron on this link
Posted
30 June 2003

For sale 1980 CBX1000A recent overhaul including frame sprayed. New silver paint job and decals, Seat recovered, Forks re-cromed and new seals, New Brake and master seal kits new pads front and rear stainless / steel braided Brake hoses. New Starter Motor, Clutch Plates, Battery, Cam / Crank Shaft End Caps, Oil / Air Filter, Plugs / Leads, New Wheel / Steering Head Bearings, Hagon Rear Shocks, Newish Jama 6 into 2 Exaust, 11 Months Mot / Tax. Noisy Engine Hence £1750. Tel: Mitch on 01298 72157 or email Mitch on this link
Posted
19 August 2003

Wanted 81' Pro-Link large back wheel rim, size 160. Alternatively required standard back wheel rim to use for making a 160 rim. Tel: 07740 345926 or email Pat O'Neill on this link [Uttoxeter]

For Sale Click to see larger view CBX parts: -
~ A pair of low handle bars in satin black £40
~ A clutch lever housing with choke mechanism £20
~ A high bar throttle switch housing (type with out light switch) £15
--- Postage for each, £5
Tel: Dave Peters on 01793 873133 or email Dave on this link
Posted
5 June 2003

Wanted Immaculate, low-mileage CBX with six into six, Will pay cash. Tel: Chris Brittlebank on 01730 710018 (Hampshire) or email Chris on this link

For sale Click to see larger view 
Click to see larger view 
Click to see larger view
CBX 1000Z 1979. Frame modified at back end to house GSX1100K monoshock assembly, linkage and polished swinging arm. Front end polished CB1100r forks, yokes and home made fork brace. Front wheel ZXR6 with six pot calipers, back wheel ZXR7, both wheels powder coated blue to match powder coated blue frame. Engine stripped professionally and checked for tolerances, rebuilt and black paint work professionally done. Polished footrests fasteners and twin lights at front, back tail section and seat modified with led back lighting. Tank and side panels beautiful respray job, clocks white facias, carbs have stage 3 dyno jet in. Exhaust 6/1 with Art can stage 2 race end, rather loud. All in all a fantastically beautifully looking machine impeccably rebuilt and something you can orgasm over. £4000 (cost to rebuild and for bike was £8000) Tel: 01229 836196 or email Martin on this link

Wanted Does anyone have the glass that goes in front of the headlight on a Pro-Link. Mine has been broken by a stone and I am very keen to get a replacement ASAP! Tel: Adrian Tasker 01785 240899 Home or 07711 658677 Mobile [Stafford] or email Adrian on this link
Reposted
24 June 2003

For Sale ~ Brand new Petrol tap for a Z, A or B model £40
~ Brand New Full Vacuum Valve and petrol tap kit for a Z £80
~ I also have a large selection of Brand new Honda spanners, Screw drivers etc for the tool kits, ideal for any of you guys trying to complete an original tool kit at £5 each.
Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link
Posted
3 June 2003

For sale ~ CBX-Z, 1982, Silver, Reg: HPO444X
~ Mileage: 16K (Genuine, MOT's to verify mileage)
~ Condition: Immaculate
~ History: Owned from almost new from 1982 (20 Years)
~ Price: £4000 ovno.
Tel: Steve Allen on 0117 9671907 (home) [7.00pm to 9.00pm] or 0117 9790751 (work) [9.00am to 4.00pm] or email on this link
Updated
22 May 2003

Free to first caller Silver Rickman Hondastyle fairing. The one which enables you to keep the Rickman bars on the bike. In silver to fit a 1000Z. Good condition. Tel: 0121 782 5264 (between 12 noon & 19 hrs work shifts) (Birmingham) or email Malcolm Smart on this link
Posted
22 April 2003

Wanted Chrome grab handle rail assembly required for '79 Z US import bike. Tel: Ron Parker on 01772 885622 or mobile 07949 728859 (Lancashire) or email Ron on this link

For Sale Genuine 1000Z owners handbook in original plastic wallet. Now very very hard to find. Some slightly soiled pages but otherwise complete and original £40 + p&p Tel: 01745 827026 or email Mel Watkins on this link

For Sale Brand new 1000Z workshop manual, softcover. Cost from Honda when it was avaiable £53. My price £38 + p&p. Tel: 01745 827026 or email Mel Watkins on this link
Posted
2 May 2003

For sale Click to see larger view Click to see larger view Click to see larger view Click to see larger view One off front and back ends, no thinking to do just bolt on, it'll cost a box of greashan 2000 to do. £1500 ono for both front & rears ends together, will not split. Tel: Russell on 07831 538167
Posted
26 March 2003

For Sale 1979 T reg 1000Z, totally standard US import. Being sold by the son of the late owner. Very low mileage with toolkit & owners manual. High bars. Unmarked silver bodywork, original Honda exhaust. Has stood for the last year and consequently needs a lot of tlc, polishing and new battery. Some light rust on battery box etc. Priced to sell £2500 ovno. Pictures available via email, serious enquirys only please. No time wasters. Tel: Michael on 01494 776484 evenings & weekends or mobile 07889 761842 [Beds] or email Michael on this link
Posted
5 June 2003

Wanted A set of Rickman engine crash bars and a rear luggage rack, both to fit a 79 Z. (I do have a set of the Honda crash bars that look similar to the Rickman ones that I could swap with cash adjustment if you are selling your bike but want to leave crash bars on it.) Tel: Dave Peters on 01793 873133 or email Dave on this link
Reposted
2 May 2003

Wanted Mint condition, or at least without the usual crack - silver tailpiece for CBX 1000Z. Tel: Paul Hildrew on 0191 5860775 or email Paul on this link
Posted
2 May 2003

Wanted CBX 'Z' Frame and swinging arm, tank and seat, or information as to where I might get a frame. These are required to carry out the rebuild of a Prolink I recently bought that turned out to have bent frame. Thanks for any help. Tel: Kevin Murphy on 0115 9267786 (evenings), 07810 351959 (mobile) or email Kevin on this link

For sale All parts are from a 1979 1000Z
~ front wheel with discs - £50
~ rear shox - almost new - £40 / pair
~ rear wheel with disc - £40
May have to charge P&P depending on cost.
Tel: Bruce Sangster on 01382 877866 (days) or 01382 523247 (eves) or email on this link

For sale ~ CBX-Z, 1982, Silver, Reg: HPO444X
~ Mileage: 16K (Genuine, MOT's to verify mileage)
~ Condition: Judging by the photos in the mag, as good if not better than the best std CBXZ at last years Ashbourne Rally
~ History: Owned from almost new from 1982 (20 Years)
~ Some minor cycle part mods, nothing radical (improvements to weak areas) S&W Mk3 Air Shocks, Metmachex (Unbraced) Swing Arm, Fork Brace, Rickman Engine Bars, and a Cockpit Fairing (Professionally colour matched)
~ Otherwise the bike is completely standard and has not been touched (engine included) except for regular servicing (which I do myself) and lots of tlc
~ All original parts kept, so the bike can be returned to 100% original
~ Spares (Inc): Genuine Honda Workshop Manual, Owners Handbook, Rear Wheel, and Seat Tailpiece.
~ Price: £4250 ovno.
Tel: Steve Allen on 0117 9671907 (home) [7.00pm to 9.00pm] or 0117 9790751 (work) [9.00am to 4.00pm] or email on this link

For Sale Non member has an old seat and tailhump, a LHS sidepanel and a fairing subframe from a Monoshock, it needs a respray and a seat cover. Offers around £45. Email Rowlie on this link
Posted
2 May 2003

Wanted All parts are for a 1981 Pro Link Model:-
~ Tacho (37200-MA2-601) & Speedo (37250-422-601 - MPH)
~ Voltmeter - (37420-422-008) good colouring, no fading
~ Voltmeter Housing - 37415-469-000
~ Crash Bars - good condition
~ tacho / speedo housing with lights (neutral / oil etc.) - 37610-MA2-008
~ tacho back end housing - 37617-MA2-008
email Pat O'Neill on this link

For Sale Full range of Decals for the Z & A models at £4 each. Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link

For sale Red 1000Z, US import, Rickmans&w/sman S reg BSM exhaust £2,000 Tel: Stuart between 3pm & 9pm (shifts) 020 8595 4223 [Essex]

For sale Original micron fork brace in alloy - mint £40 + post. Tel: A B Little 01343 548203 [Cheshire]

Wanted Original 6 into 2 or 6 into 6 willing to pay for mint system. Tel: A B Little 01343 548203 [Cheshire]

For Sale Genuine 1000Z Honda factory mechanics manual (Loose Leaf) not the green and white paperback with the gearbox misprint error sold to the general public. In a four ring binder. Totally original. £35 + p&p. Tel: 01745 827026 or email Mel Watkins on this link

For Sale Combined 1000Z & A parts book. Now very hard to find. Almost 400 pages with every part number and exploded pictures of parts for both models. Not mint but complete. £35 + p&p Tel: 01745 827026 or email Mel Watkins on this link

Wanted For 1000Z regulator / rectifier, headlamp unit, tach cable email Doug Gray on this link

For sale Click to see larger view 1000Z, 1979, 21k miles, 12 months tax and mot, red, good standard condition, new BSM exhaust, £2,750 sorry no offers - sale due to new project. Tel: 07870 105075 or email Richard Cooper on this link
Posted
22 April 2003

For sale 1000Z Chainguard Warning Stickers, no longer available from Honda, Members £4, Non members £5. Tel: Nick Hare 01732 870771

Wanted Moto Martin CBX or 'Unusual' CBX. Will travel anywhere in UK. Tel: Alan Wood on 01865 554777 eves and weekends or email Alan Wood on this link

For sale Ricky White is looking for offers of around £6,000 for either of his two CBXs to finance his latest project. Click on this link to see the bikes. Tel: Ricky White 02866 329586 (N Ireland)

For sale Click to see larger view Honda CB900F 1979, 21,000 Miles, Completely restored & freshly painted in F2 Red / white colours, fitted with period 3 Spoke alloy CMA wheels, 4 into one exhaust & Koni shocks £1500
Also for sale 1982 pro-link odd parts Pair of Jama silencers (cheap) Rear wheel / Airbox / brake callipers / rectifier / polished alternator cover etc.
Tel: 01206 523442 (Colchester) or email Steve on this link

For sale 1) Honda touring fairing with fitting kit for Z painted Red. Offers in the region of £100
2) Set of Krouser hard panniers with mounting frame for Z these are black. Offers in the region of £150
email Richard Cooper on this link

Wanted A "hugger" that goes on the back wheel of a prolink. email Pat O'Neill on this link [Uttoxeter]

For sale Complete moto-martin frame kit minus fairing for sale along with a complete and mot'd 1978 Z, wanting to sell together for £4500 or may sell frame kit for £2900. You can email James Kay on this link

For sale Silver 1000Z, vgc with the following spares:- engine, seat, tank & guards £3,200 Tel: Keith on 07980 000445 anytime or evenings on 01728 280168 (Suffolk)

Wanted CBX Z wanted for cash. Up to £4000 offered for immaculate example but need not be standard. Improvements welcomed. Six into 1 actually preferred! Tel: Ian Neal 07976 247474 or email Ian on this link

For sale W reg much modified 1000Z with VFR running gear including single sided swinging arm. Fitted with brand new laser 6 into 1 and dyno jetted. Five gallon tank, mot & taxed. Bargain £2650 ono Tel: Jim 01738 620537 (Scotland)

For sale 1981 Pro-Link. Absolute bargain and reduced for early sale. Owned thirteen years X reg, fsh, owners handbook, toolkit, Jama Exhaust & fitted with full set of krausers. New rear tyre. Only £1500. Tel: 01799 584617 (H) & 01223 403422 (W) Direct line, or email Kevin on this link (Not a club member)

For sale CBX 1000 Gold Portfolio. The publishers have only a few copies left, over 200 pages of CBX road tests and articles of all models of CBX. I have a few left at £15.95 incl p&p Tel: Mel 01745 827026 (9am - 9.30pm anyday)

Wanted Moto Martin CBX Tel: John Cuthbertson on 01642 534085 (Tyne & Wear)

Wanted Original swinging arm for 1979 CBX 1000Z - must be in good condition. e mail Alan Stubbs

Wanted Original swinging arm for 1979 CBX 1000Z - must be in good condition and include chain adjusters. e mail Alan Stubbs

For sale Click to see larger view CBX Prolink Special, chrome engine covers, lots of polished items, special paint, Predator stainless steel exhaust (6 into 2). Too much spec' to list. £3,000. Tel: Geoff Haines (home) 01789 294063 or email Geoff on this link

For sale Click to see larger view 1000Z, Silver, 1980, W reg, 6 into 1 lazer exhaust, crash bars, work shop manual, new brake pads (not fitted) and swinging arm bushes (not fitted), also back rack (rusty - not fitted). £1750 - Tel: Richard Sindall 0151 645 6597 (Wirral)

For sale 1980 CBX 1000Z, seat - very good condition, air box - vgc, front mudguard - fair condition, 1 original rev counter - vgc Tel Robin 01623 411233 after 6.30pm, or email Robin Heath

For sale 1978 1000Z 30,000 kms(20K) 6 into 1, Rickmans and rear crash bars. Non standard colour (Purple) MOT. - £3000 ono. Tel Mike Brodie 01892 664135

Wanted Pipemasters 6 into 6 exhaust. Tel Tony Smith 01625 859635 Evenings & weekends

For Sale ~ Z Shop Manual, loose leaf type in original Blue ring binder £25
~ Z Petrol Tank cap, no greying or cracks £15
Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link

For Sale ~ Z Air Filter support frame , new Filter and retaining clip £20 Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link

Wanted Has anyone got a KPH speedo for a Z they want to sell? Must be good condition (not to faded). Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link

For sale Y reg Grey Pro Link (click here to see picture) 19,800 miles with virtually all MOT's. Fitted with Jama chrome 6 into 2 with stainless cans. VGC. Also, still have original down pipes, owners handbook, tyre gauge, microfiche and workshop manual. Also included spare shims, brake pistons, seals and some smaller transfers. One years T&T Health forces sale. £2750 - Tel Peter Harris 01329 315150 (Hants)

For sale ~ CBX1000Z seat trims and straps, have brought in a few more sets made in stainless steel with burnished finish to look like original fragile alloy ones. Never sold separately by Honda. Set of trims incl fittings £40 post free.
~ Also have a few 1000Z seat straps incl fittings at £25 post free.
Tel: Mel 01745 827026 (9am - 9.30pm anyday)

For sale As new voltmeter for 1000Z or Prolink. Bright numbers, no fading whatsoever. £40 incl p&p Tel: Mel 01745 827026 (9am - 9.30pm anyday)

For sale Pair 1000Z new footrest hanger stickers, no longer available from Honda, £12 the pair post free. Also new set Supersport / 24 valve, wear helmet stickers £15 post free. Yellow 1000Z New Helmet Holder stickers for Helmet lock £3 post free. Tel: Mel 01745 827026 (9am - 9.30pm anyday)

For sale All parts are from a 1979 1000Z
~ front forks - good condition but need seals - £70
~ front calipers - £40 per pair
~ handlebars - £20 / pair
~ Micron fork brace - £30
~ front mudguard - £20
~ top & bottom yokes - £20 / pair
~ JMC braced s/arm (damage on bracing but easy repair) - £80
~ front master cylinder - £20
May have to charge P&P depending on cost.
Tel: Bruce Sangster on 01382 877866 (days) or 01382 523247 (eves) or email on this link

Wanted Rear shocks for 1979 CBX1000Z - must be in excellent condition! e mail Alan Stubbs

For sale Complete set of Pro-Link Forks c/w top & bottom yokes. Stanchions will need re-chroming, hence only £50 ovno. Tel Paul 01206 823537 (Colchester)

For sale ~ Brand new 1000Z or P/L head gasket £50 ono (list £62.31)
~ New rocker cover gasket £35 ono (list 43.63)
~ New Z indicator unit £15 ono
~ Carb adjusting tool £10
~ New regulator / rectifier £150 ono (List £245 + vat)
~ Official Honda workshop manual (loose leaf in binder) with addendums inc 'B' model £40
~ RHS 1000Z silencer, some scratches on end but otherwise OK £150 ono
~ Set of rickman crashbars (RHS damaged but repairable) £75 ono
Tel: Giles Oldknow 01925 754410 (Home), 07790 628281 (mobile), 01925 835274 (work)
[Cheshire]

For sale White Pro-Link 1981 model B. X reg, VGC with full set of luggage & tool kit. MOT. 33k £2,500 ovno tel Billy Wells 01942 723945 (Wigan)

Wanted Luggage rack for Z model. Tel: Jerry Reynolds on 01394 670896 or email Jerry on this link

For sale ~ Original Honda exhaust system. Right side new 2 years ago and is mint. Left side on bike when purchased 5 years ago and is near mint. (EPA warning is a riveted on plate and not stamped into the muffler on the old left side). £600 ono.
~ Hagon shocks, 2 years old, no rust, cost £135 accept £65
Tel Alan Lynch, Home: 0161 683 4965, Mobile: 07984 179407 or e mail Alan Lynch

For Sale Original workshop Manual for a Z, loose leaf type, looks as if it's never been used £45 inc shipping. Brand new Petrol Tap & Vac Tap Kit, still in Honda packaging £55 inc shipping. Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link

Wanted Required to fit 79 CBX 1000Z, a set of Jama engine crash bars and a throttle switch housing to convert my US spec so that the throttle cables will sprout from the top (it has low bars fitted) Tel: Dave Peters 01793 873133 or email Dave on this link

Wanted I have problems getting the air cleaner duct 17240-422-000 for my 79 CBX-z. Can anyone in the club help. New or used does not matter! e mail Erling Kleve

Wanted I am seeking a carrier / rack with a small rest or grab rail which will definitely fit an 81/82 (prolink) CBX without damaging the original fabric. e mail Steve Rigby

Wanted American spec high handle bars, standard mirrors and a volt meter for a CBX 1000A 1980 Tel Malcolm Wagg 07958 365627 or Email him on this link

For sale For sale, original hand book for Pro-link, very good condition £30 inc's UK postage. Tel: Dave Peters 01793 873133 or email Dave on this link

For sale Grey 1983 A reg Pro-Link in excellent condition, lots spent on new parts. Original Honda Exhaust and totally standard apart from braided ss hoses. Readvertised due to time wasters. Very reluctant sale. MOT to Jun. £2750 ovno. tel Roy 01 933 318631 / 07788 817498(Northants)

For sale Set of chrome Jama crash bars for 1000Z vgc. £100 ovno. Tel: Richard 01489 795013 (Southampton)

For Sale I have some Original ally Seat Trims for the Z - £10 each. Also have a couple of front sprocket covers at £25 each, and a complete Vac Tap and Petcock assembly's for a Z at £80 Tel: Ian Billingham on 0116 2776582 (Leicester) or email Ian on this link

For sale Pro-Link 1982 X reg, T&T 36k Many new genuine Honda Parts. Recent Service. W/Manual. vgc. First to see will buy. £2250 ono. Tel Paul 01206 823537, or email Paul Baker (Colchester)

Wanted "period" mirrors for a Z i.e. the round black ones that were up until recently available from David Silver Email Dave Peters

For sale CBX Supersport, Z Model, 1980 (W Reg), 20k miles, Red, 6 into 1 Marshall exhaust, VGC. Click on this link to see the bikes. Offers around £1,850 ono Tel: Chris Kenlay 01604 705717 (eve), 07977 206489 (mobile), or email Chris on this link (Northampton)

For sale Hagon shocks. 2 years old no rust, I had these made by the manufacturers in full chrome. As new cost £130 will accept £65 e mail Alan Lynch

Swap / Part exchange Can anyone in cbxland help me to obtain a pipemasters 6-6 exhaust system. I have an original system to swap / part-exchange, cash either way. The left side was on the bike when I got it 4 years ago and is a little rusty where you cant see it. Where you can see it it is immaculate. The right side was purchased by me two years ago brand new and has about 1000 miles on it - as new! Tel Alan Lynch
Home:
0161 683 4965
Mobile:
07984 179407
e mail Alan Lynch

For sale Red CBX 1000Z 1980, wiseco 1147, recent new valves, springs, seals. k&n's, jmc swingarm, corbin seat, 6 into 1, frame up restoration, chromed casings, Receipts for £8.5k, regrettable sale. £4250 ovno. Tel Robin 01623 411233 after 6pm, or email Robin Heath